Date: Mon, 14 Oct 2002 03:00:29 -0700 (PDT) From: Kristian Rask <krask@mediac.dk> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/44044: 4.7-R Freezes half the times snd.ko is loaded (Creative SB live EMU10K) Message-ID: <200210141000.g9EA0TwA069961@www.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 44044
>Category: misc
>Synopsis: 4.7-R Freezes half the times snd.ko is loaded (Creative SB live EMU10K)
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Oct 14 03:10:01 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Kristian Rask
>Release: 4.7-R
>Organization:
>Environment:
FreeBSD dp166.ikrask.dk 4.7-RELEASE FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002 root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC i386
>Description:
When i boot the machine and log in as root, i write "kldload /modules/snd.ko"
Wether this hangs the machine or not, the machine goes "pcm0:<Creative EMU10K1> port 0xd00-0xd01f irq 14 at device 13.0 on pci2"
If the machine hangs NumLock, CapsLock and ScrollLock works in terms of keyboard LED's.. apart from that everything is dead.. you cant telnet into the machine either..so its apparently not the console but the machine as such.
If it doesnt hang, sound works.
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1816.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 536854528 (524272K bytes)
config> di pcic0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 517173248 (505052K bytes)
Preloaded elf kernel "kernel" at 0xc050f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc050f09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f1760
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xf4000000-0xf4000fff i
rq 9 at device 10.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xf3000000-0xf30fffff,0
xf3800000-0xf3800fff irq 15 at device 12.0 on pci2
fxp0: Ethernet address 00:90:27:8f:89:ec
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x1102, dev=0x0002) at 13.0 irq 14
pci2: <unknown card> (vendor=0x1102, dev=0x7002) at 13.1
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> at device 31.1 on pci0
atapci0: ATA channel disabled by BIOS
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xa400-0xa41f irq 10 at de
vice 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xa000-0xa01f irq 9 at dev
ice 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcc7ff,0xd0000-0xd0fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDYS-T09170N S80D> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.01> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da1: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
WARNING: / was not properly dismounted
pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 14 at device 13.0 on pci2
The last line is the result of kldload snd when it doesnt hang.. when it hangs the message doesnt make it to the harddrive..
The mainboard is an Asus P4B series
>How-To-Repeat:
Reboot or reset the machine several times.. the problem occurs approx. 50% of the time. There are no indications of problems when running Win98. I've had and used the card and this particular configuartion of the machine for approx. one year. It is used several hours every day.
The problem occurs (tested) rebooting from 98 to FreeBSD and rebooting from FreeBSD to FreeBSD. The problem does not disappear when the reset switch is used. ie its apparently not a case of "Card in unknown state due to lack of bus-reset". I can not w. 100% certainty say anything about the behavior when the machine is powered on and booted. i simply cant remember.. sorry :-)
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210141000.g9EA0TwA069961>