Date: Sun, 22 Jul 2007 02:23:23 +0700 From: Alexey Dokuchaev <danfe@nsu.ru> To: freebsd-acpi@freebsd.org Subject: 6.2-STABLE + NEC Versa S950 problems Message-ID: <20070721192323.GA38759@regency.nsu.ru>
next in thread | raw e-mail | index | archive | help
--FCuugMFkClbJLl1L Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello there, I've recently got that NEC Versa S950 laptop, and installed FreeBSD 6.2-RELEASE on it. Since getting sound working required HDA support, which is missing in 6.2-RELEASE but present in 6-STABLE, I've cvsup'ed to RELENG_6, rebuilt world and kernel. And that's where the problems begin (userland + kernel sources as of 17 July). With ACPI enabled, boot process hangs (in rc stage, so I'm generally (but not always, especially during verbose boot) able to skip the problematic steps with ^C). Even if I manage to login afterwards, there's no network for me, mouse does not work, resume does not work (reset_video hack did not help), and it's often not possible to reboot the system with Ctrl-Alt-Del (soft-off works, though). If I wait long enough during startup (no Ctrl-C's), the system will eventually hang completely. It usually hangs after bge0 tells it's UP (but I never see "got link" message that normally appear afterwards). Like I said, boot -v gives even less chance to get down to login prompt (even so, it's not always possible to log in). In 90% of cases, only soft-off (power button) helps (it cleanly shuts the system down). In fact, recent few times I tried, it always ended up hanging). Replacing acpi.ko from -RELEASE kernel makes -STABLE kernel boot fine. Since I'm currently cannot boot even into single user with new kernel, sysctl and ASL are collected while booted with vanilla acpi.ko from 6.2-RELEASE. Disabling ACPI makes all of these go away, but I a) need APIC for sound card to show up, and b) I'd really want that suspend/resume and PM stuff to work. :-) Switching to APM did not help either (zzz(8) complains about "missing /dev/apm", power button acts as instant off). Interestingly enough, 6.2-RELEASE used to boot fine with ACPI enabled. No weird compilation flags were used to recompile the -STABLE kernel (both slim custom kernel and GENERIC were tested, -STABLE does not work for me). Either -STABLE became more picky about [in]correct ACPI implementation, of something was broken after 6.2-RELEASE went gold. Vanilla 6.2-RELEASE GENERIC kernel works fine (with fresh -STABLE userland). Disabling USB, sound, NIC driver, et al does not help. BIOS updated to most recent version available on vendor's site (ver. 3A23 as of 10-10-2006). I'm attaching dmesg(8) of verbose boot with ACPI on and off, sysctl hw.acpi. is there too (doing that causes of lost of "ACPI-1287: *** Error: Method execution failed"-type of message from kernel, those are attached as well). My ASL can be found here: http://193.124.210.26/danfe-nec_versa_s950.asl I also must admit I did not quite get this piece of advice from the Handbook: <cite> The simplest first check you can do is to recompile your ASL to check for errors. Warnings can usually be ignored but errors are bugs that will usually prevent ACPI from working correctly. To recompile your ASL, issue the following command: # iasl your.asl </cite> Does it mean that decompiling/recompiling ASL can probably cure something for me? I did not try this one. I am also yet to compile debug kernel, but I first need to get FireWire setup (laptop has no COM ports, and I lack IrDA adapter in my desktop). Attached files: dmesg_acpi dmesg(8) output after boot -v dmesg_no_acpi dmesg(8) (boot -v), ACPI disabled sysctl_hw_acpi Output from sysctl hw.acpi. sysctl_hw_acpi_errors Errors while invoking sysctl They're all available via HTTP, use the URL given above. Thanks, and I'm eager to provide any additional information. ./danfe --FCuugMFkClbJLl1L Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg_acpi Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #7: Sat Jul 21 03:56:36 NOVST 2007 root@daria.lawndale.high:/usr/obj/usr/src/sys/DARIA Preloaded elf kernel "/boot/kernel/kernel" at 0xc0865000. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0865200. Preloaded elf module "/boot/kernel/linux.ko" at 0xc08652ac. Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc0865358. Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc0865404. Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc08654b0. Preloaded elf module "/boot/kernel/if_bge.ko" at 0xc086555c. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0865608. Preloaded elf module "/boot/kernel/snd_hda.ko" at 0xc08656b4. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0865760. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc086580c. Preloaded elf module "/boot/kernel/usb.ko" at 0xc08658b8. Preloaded elf module "/boot/kernel/umass.ko" at 0xc0865960. Preloaded elf module "/boot/kernel/agp.ko" at 0xc0865a0c. Preloaded elf module "/boot/kernel/random.ko" at 0xc0865ab4. Preloaded elf module "/boot/kernel/ata.ko" at 0xc0865b60. Preloaded elf module "/boot/kernel/atapci.ko" at 0xc0865c08. Preloaded elf module "/boot/kernel/atadisk.ko" at 0xc0865cb4. Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc0865d60. Preloaded elf module "/boot/kernel/atapicd.ko" at 0xc0865e10. Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xc0865ebc. Preloaded elf module "/boot/kernel/kbdmux.ko" at 0xc0865f68. Preloaded elf module "/boot/kernel/sio.ko" at 0xc0866014. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08660bc. Table 'FACP' at 0x1f68be8a Table 'APIC' at 0x1f68befe MADT: Found table at 0x1f68befe APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: <INTEL ALVISO > Calibrating clock(s) ... i8254 clock: 1193175 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1696267246 Hz CPU: Intel(R) Pentium(R) M processor 1.70GHz (1696.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 526909440 (502 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000001ed66fff, 504635392 bytes (123202 pages) avail memory = 505913344 (482 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6550 bios32: Entry = 0xfd6f0 (c00fd6f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6f0+0x25e pnpbios: Found PnP BIOS data at 0xc00f65d0 pnpbios: Entry = f0000:adce Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 2, Interrupt 24 at 0xfec20000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> random: <entropy source, Software, Yarrow> kbd: new array size 4 kbd1 at kbdmux0 io: <I/O> VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00 00 01 7b 00 00 01 3d 01 00 01 4f 01 00 01 7d 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 9 mode(s) found VESA: v3.0, 7872k memory, flags:0x1, mode table:0xc06ad740 (1000040) VESA: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS VESA: Intel Corporation Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0 acpi0: <PTLTD RSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi_hpet0: <High Precision Event Timer> iomem 0-0x3ff on acpi0 acpi_hpet0: vend: 0xf000 rev: 0x53 num: 0 hz: 248349 opts: leg_route count_size Timecounter "HPET" frequency 248349 Hz quality 2000 ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc3294ce0 StartNode 0xc3294ce0 ReturnNode 0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f920 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xcd37a000 pa 0x9d000 unknown: I/O range not supported ACPI timer: 0/215751 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0 acpi: bad write to port 0x080 (32), val 0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2592, revid=0x04 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base b0080000, size 19, enabled map[14]: type 4, range 32, base 00001800, size 3, enabled map[18]: type 3, range 32, base c0000000, size 28, enabled map[1c]: type 1, range 32, base b0000000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2792, revid=0x04 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base 00000000, size 19, memory disabled found-> vendor=0x8086, dev=0x2668, revid=0x04 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base d000c000, size 14, enabled found-> vendor=0x8086, dev=0x2660, revid=0x04 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2662, revid=0x04 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2664, revid=0x04 bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2658, revid=0x04 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2659, revid=0x04 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x265a, revid=0x04 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x265b, revid=0x04 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x265c, revid=0x04 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base b0040000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0xd4 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2641, revid=0x04 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266f, revid=0x04 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001810, size 4, enabled found-> vendor=0x8086, dev=0x266a, revid=0x04 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 000018e0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 16 at device 2.0 on pci0 agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000 agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000 agp0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xb0000000 agp0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000 agp0: detected 7932k stolen memory agp0: aperture size is 256M pci0: <display> at device 2.1 (no driver attached) pcm0: <Intel 82801F High Definition Audio Controller> mem 0xd000c000-0xd000ffff at device 27.0 on pci0 pcm0: TCSEL: 0x07 -> 0x00 pcm0: DMA Coherency: Uncacheable / vendor=0x8086 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd000c000 pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 pcm0: [MPSAFE] pcm0: hdac_dma_alloc: size=1024 -> roundsz=1024 pcm0: hdac_dma_alloc: size=2048 -> roundsz=2048 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib1: secondary bus 9 pcib1: subordinate bus 9 pcib1: I/O decode 0x0-0x0 pcib1: memory decode 0x0-0x0 pcib1: prefetched decode 0x0-0x0 pci9: <ACPI PCI bus> on pcib1 pci9: physical bus=9 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pcib2: secondary bus 10 pcib2: subordinate bus 10 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0x0-0x0 pcib2: prefetched decode 0x0-0x0 pci10: <ACPI PCI bus> on pcib2 pci10: physical bus=10 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: secondary bus 2 pcib3: subordinate bus 4 pcib3: I/O decode 0x0-0x0 pcib3: memory decode 0x0-0x0 pcib3: prefetched decode 0x0-0x0 pci2: <ACPI PCI bus> on pcib3 pci2: physical bus=2 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0040000-0xb00403ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xb0040000 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib4: secondary bus 6 pcib4: subordinate bus 7 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xb0100000-0xb01fffff pcib4: prefetched decode 0xfff00000-0xfffff pcib4: Subtractively decoded bridge. pci6: <ACPI PCI bus> on pcib4 pci6: physical bus=6 found-> vendor=0x14e4, dev=0x169c, revid=0x03 bus=6, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 32, base b0100000, size 16, enabled pcib4: requested memory range 0xb0100000-0xb010ffff: good pcib4: matched entry for 6.6.INTA pcib4: slot 6 INTA hardwired to IRQ 16 found-> vendor=0x104c, dev=0x8031, revid=0x00 bus=6, slot=7, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x31 (1470 ns), mingnt=0x44 (17000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0116000, size 12, enabled pcib4: requested memory range 0xb0116000-0xb0116fff: good pcib4: matched entry for 6.7.INTA pcib4: slot 7 INTA hardwired to IRQ 18 found-> vendor=0x104c, dev=0x8032, revid=0x00 bus=6, slot=7, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0117000, size 11, enabled pcib4: requested memory range 0xb0117000-0xb01177ff: good map[14]: type 1, range 32, base b0110000, size 14, enabled pcib4: requested memory range 0xb0110000-0xb0113fff: good pcib4: matched entry for 6.7.INTA pcib4: slot 7 INTA hardwired to IRQ 18 found-> vendor=0x104c, dev=0x8033, revid=0x00 bus=6, slot=7, func=3 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0114000, size 13, enabled pcib4: requested memory range 0xb0114000-0xb0115fff: good pcib4: matched entry for 6.7.INTA pcib4: slot 7 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x4220, revid=0x05 bus=6, slot=8, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base b0118000, size 12, enabled pcib4: requested memory range 0xb0118000-0xb0118fff: good pcib4: matched entry for 6.8.INTA pcib4: slot 8 INTA hardwired to IRQ 17 bge0: <Broadcom BCM5705 A3, ASIC rev. 0x3003> mem 0xb0100000-0xb010ffff irq 16 at device 6.0 on pci6 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xb0100000 miibus0: <MII bus> on bge0 brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 brgphy0: OUI 0x000818, model 0x001a, rev. 2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:16:36:d2:74:f3 bge0: [MPSAFE] pci6: <bridge, PCI-CardBus> at device 7.0 (no driver attached) pci6: <serial bus, FireWire> at device 7.2 (no driver attached) pci6: <mass storage> at device 7.3 (no driver attached) pci6: <network> at device 8.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 sio0: irq maps: 0xe01 0xe09 0xe01 0xe01 sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57 npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2 Device configuration finished. lapic: Divisor 2, Frequency 49890216 hz Timecounter "TSC" frequency 1696267246 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH6 chip ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: setting UDMA33 on ICH6 chip ad0: 57231MB <WDC WD600UE-22KVT0 01.03K01> at ata0-master UDMA33 ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0acd0: setting PIO4 on ICH6 chip acd0: setting UDMA33 on ICH6 chip acpi_acad0: acline initialization start battery0: battery initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc3294ce0 StartNode 0xc3294ce0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc3294be0), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND battery0: battery initialization done, tried 1 times acd0: <PHILIPS DVD+/-RW SDVD8441/PX49> DVDR drive at ata0 as slave acd0: read 2067KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 32 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM unknown pcm0: HDA_DEBUG: HDA Config: on=0x00000000 off=0x00000000 pcm0: HDA_DEBUG: Starting CORB Engine... pcm0: HDA_DEBUG: Starting RIRB Engine... pcm0: HDA_DEBUG: Enabling controller interrupt... pcm0: HDA_DEBUG: Scanning HDA codecs... pcm0: HDA_DEBUG: Probing codec: 0 pcm0: HDA_DEBUG: startnode=1 endnode=2 pcm0: HDA_DEBUG: Found AFG nid=1 [startnode=1 endnode=2] pcm0: HDA_DEBUG: Parsing AFG nid=1 cad=0 pcm0: Vendor: 0x00008384 pcm0: Device: 0x00007690 pcm0: Revision: 0x00000022 pcm0: Stepping: 0x00000001 pcm0: PCI Subvendor: 0x83171033 pcm0: Nodes: start=2 endnode=21 total=19 pcm0: CORB size: 256 pcm0: RIRB size: 256 pcm0: Streams: ISS=4 OSS=4 BSS=0 pcm0: GPIO: 0xc0000004 pcm0: NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=4 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=7 entries=3 found=3 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=9 entries=2 found=2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=10 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=11 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=12 entries=5 found=5 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=13 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=14 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=15 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=16 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=17 entries=1 found=1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=19 entries=1 found=1 pcm0: HDA_DEBUG: Parsing Ctls... pcm0: HDA_DEBUG: Parsing vendor patch... pcm0: HDA_DEBUG: Building AFG tree... pcm0: HDA_DEBUG: HWiP: HDA Widget Parser - Revision 1 pcm0: HDA_DEBUG: HWiP: Found 2 DAC path using HDA_PARSE_MIXER strategy. pcm0: HDA_DEBUG: AFG commit... pcm0: HDA_DEBUG: Ctls commit... pcm0: [ 2] Ctl nid=11 Bind to NONE pcm0: [ 4] Ctl nid=17 DISABLED pcm0: HDA_DEBUG: PCMDIR_PLAY setup... pcm0: HDA_DEBUG: PCMDIR_REC setup... pcm0: HDA_DEBUG: OSS mixer initialization... pcm0: HDA_DEBUG: Forcing Soft PCM volume pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "mic": pcm0: Mixer "rec": pcm0: Soft PCM mixer ENABLED pcm0: HDA_DEBUG: Registering PCM channels... pcm0: hdac_dma_alloc: size=4096 -> roundsz=4096 pcm0: sndbuf_setmap 1eb06000, 4000; 0xd5322000 -> 1eb06000 pcm0: hdac_dma_alloc: size=4096 -> roundsz=4096 pcm0: sndbuf_setmap 1eae6000, 4000; 0xd5326000 -> 1eae6000 pcm0: <HDA Codec: Sigmatel STAC9220> pcm0: <HDA Codec ID: 0x83847690> pcm0: <HDA Driver Revision: 20070710_0047> pcm0: pcm0: HDA config/quirks: softpcmvol forcestereo ivref50 ivref80 ivref100 ivref pcm0: pcm0: +-------------------+ pcm0: | DUMPING HDA NODES | pcm0: +-------------------+ pcm0: pcm0: Default Parameter pcm0: ----------------- pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: IN amp: 0x00000000 pcm0: OUT amp: 0x80051f1f pcm0: pcm0: nid: 2 [ANALOG] pcm0: name: audio output pcm0: widget_cap: 0x000d0401 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: connections: 0 pcm0: pcm0: nid: 3 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x001d0541 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000800 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: connections: 1 pcm0: | pcm0: + <- nid=10 [audio selector] pcm0: pcm0: nid: 4 [DIGITAL] [DISABLED] pcm0: name: audio input pcm0: widget_cap: 0x00140311 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000005 pcm0: Format: AC3 PCM pcm0: PCM cap: 0x000e0160 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 96 pcm0: connections: 1 pcm0: | pcm0: + <- nid=8 [pin: SPDIF in (jack)] [DISABLED] pcm0: pcm0: nid: 5 [DIGITAL] [DISABLED] pcm0: name: audio output pcm0: widget_cap: 0x00040211 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000005 pcm0: Format: AC3 PCM pcm0: PCM cap: 0x000e01e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 pcm0: connections: 0 pcm0: pcm0: nid: 6 [DIGITAL] [DISABLED] pcm0: name: vendor widget pcm0: widget_cap: 0x00f30201 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 0 pcm0: pcm0: nid: 7 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300901 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000081 pcm0: connections: 3 pcm0: | pcm0: + <- nid=2 [audio output] (selected) pcm0: | pcm0: + <- nid=8 [pin: SPDIF in (jack)] [DISABLED] pcm0: | pcm0: + <- nid=10 [audio selector] pcm0: pcm0: nid: 8 [DIGITAL] [DISABLED] pcm0: name: pin: SPDIF in (jack) pcm0: widget_cap: 0x00430681 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00010024 pcm0: IN EAPD : UNSOL pcm0: Pin config: 0x01c5e030 pcm0: Pin control: 0x00000020 IN pcm0: EAPD: 0x00000002 pcm0: connections: 0 pcm0: pcm0: nid: 9 [DIGITAL] [DISABLED] pcm0: name: pin: SPDIF out (jack) pcm0: widget_cap: 0x00400301 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000010 pcm0: OUT pcm0: Pin config: 0x01451012 pcm0: Pin control: 0x00000040 OUT pcm0: connections: 2 pcm0: | pcm0: + <- nid=5 [audio output] [DISABLED] pcm0: | pcm0: + <- nid=10 [audio selector] pcm0: pcm0: nid: 10 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030090d pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000881 pcm0: Output amp: 0x80050f00 pcm0: mute=1 step=15 size=5 offset=0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=12 [audio selector] pcm0: pcm0: nid: 11 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300105 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x80051f1f pcm0: mute=1 step=31 size=5 offset=31 pcm0: connections: 1 pcm0: | pcm0: + <- nid=7 [audio selector] pcm0: pcm0: nid: 12 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000006 pcm0: Ctl flags: 0x00000081 pcm0: Output amp: 0x00270400 pcm0: mute=0 step=4 size=39 offset=0 pcm0: connections: 5 pcm0: | pcm0: + <- nid=16 [pin: Mic in (jack)] (selected) pcm0: | pcm0: + <- nid=15 [pin: line in (jack)] pcm0: | pcm0: + <- nid=14 [pin: line out (jack)] pcm0: | pcm0: + <- nid=13 [pin: headphones out (jack)] pcm0: | pcm0: + <- nid=18 [pin: CD (fixed)] pcm0: pcm0: nid: 13 [ANALOG] pcm0: name: pin: headphones out (jack) pcm0: widget_cap: 0x00400181 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0000003f pcm0: ISC TRQD HP OUT IN : UNSOL pcm0: Pin config: 0x02214011 pcm0: Pin control: 0x000000c0 HP OUT pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 14 [ANALOG] pcm0: name: pin: line out (jack) pcm0: widget_cap: 0x00400181 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0000003f pcm0: ISC TRQD HP OUT IN : UNSOL pcm0: Pin config: 0x01014010 pcm0: Pin control: 0x00000040 OUT pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 15 [ANALOG] pcm0: name: pin: line in (jack) pcm0: widget_cap: 0x00400181 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000037 pcm0: ISC TRQD OUT IN : UNSOL pcm0: Pin config: 0x01813021 pcm0: Pin control: 0x00000020 IN pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 16 [ANALOG] pcm0: name: pin: Mic in (jack) pcm0: widget_cap: 0x00400181 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000081 pcm0: Pin cap: 0x00001737 pcm0: ISC TRQD OUT IN VREF[ 50 80 GROUND HIZ ] : UNSOL pcm0: Pin config: 0x02a19020 pcm0: Pin control: 0x00000024 IN pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 17 [ANALOG] [DISABLED] pcm0: name: pin: speaker (none) pcm0: widget_cap: 0x00400104 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000010 pcm0: OUT pcm0: Pin config: 0x50170013 pcm0: Pin control: 0x00000040 OUT pcm0: Output amp: 0x80051f1f pcm0: mute=1 step=31 size=5 offset=31 pcm0: connections: 1 pcm0: | pcm0: + <- nid=19 [audio mixer] pcm0: pcm0: nid: 18 [ANALOG] pcm0: name: pin: CD (fixed) pcm0: widget_cap: 0x00400001 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x90330022 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0: pcm0: nid: 19 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200100 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 1 pcm0: | pcm0: + <- nid=7 [audio selector] pcm0: pcm0: nid: 20 [ANALOG] pcm0: name: beep widget pcm0: widget_cap: 0x0070000c pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000021 pcm0: Output amp: 0x80170303 pcm0: mute=1 step=3 size=23 offset=3 pcm0: connections: 0 pcm0: pcm0: +------------------------+ pcm0: | DUMPING HDA AMPLIFIERS | pcm0: +------------------------+ pcm0: pcm0: 1: nid=10 dir=0x1 index=0 ossmask=0x00000800 ossdev=0 pcm0: 2: nid=11 dir=0x1 index=0 ossmask=0x00000001 ossdev=0 pcm0: 3: nid=12 dir=0x1 index=0 ossmask=0x00000080 ossdev=7 pcm0: 4: nid=17 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 [DISABLED] pcm0: 5: nid=20 dir=0x1 index=0 ossmask=0x00000020 ossdev=5 pcm0: pcm0: +-----------------------------------+ pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS | pcm0: +-----------------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- nid: 11 index: 0 mute: 1 step: 31 size: 5 off: 31 dir=0x1 ossmask=0x00000001 pcm0: pcm0: Microphone Volume (OSS: mic) pcm0: | pcm0: +- nid: 12 index: 0 mute: 0 step: 4 size: 39 off: 0 dir=0x1 ossmask=0x00000080 pcm0: pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- nid: 10 index: 0 mute: 1 step: 15 size: 5 off: 0 dir=0x1 ossmask=0x00000800 pcm0: pcm0: Speaker/Beep (OSS: speaker) pcm0: | pcm0: +- nid: 20 index: 0 mute: 1 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000020 pcm0: pcm0: Playback path: pcm0: pcm0: nid=13 [pin: headphones out (jack)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=11 [audio selector] pcm0: ^ pcm0: | pcm0: nid=7 [audio selector] pcm0: ^ pcm0: | pcm0: nid=2 [audio output] pcm0: pcm0: nid=14 [pin: line out (jack)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=11 [audio selector] pcm0: ^ pcm0: | pcm0: nid=7 [audio selector] pcm0: ^ pcm0: | pcm0: nid=2 [audio output] pcm0: pcm0: Recording sources: pcm0: pcm0: nid=12 [audio selector] pcm0: | pcm0: + <- nid=16 [pin: Mic in (jack)] [recsrc: vol, mic] pcm0: | pcm0: + <- nid=15 [pin: line in (jack)] pcm0: | pcm0: + <- nid=14 [pin: line out (jack)] pcm0: | pcm0: + <- nid=13 [pin: headphones out (jack)] pcm0: | pcm0: + <- nid=18 [pin: CD (fixed)] pcm0: pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: PCM Playback: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: DAC: 2 pcm0: pcm0: PCM Record: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: ADC: 3 Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc3294ce0 StartNode 0xc3294ce0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc3294be0), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc3294ce0 StartNode 0xc3294ce0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc3294be0), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc3294ce0 StartNode 0xc3294ce0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc3294be0), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc3294ce0 StartNode 0xc3294ce0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc3294be0), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc3294ce0 StartNode 0xc3294ce0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc3294be0), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc3294ce0 StartNode 0xc3294ce0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc3294be0), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND pass0 at ata0 bus 0 target 1 lun 0 pass0: <PHILIPS DVD+-RW SDVD8441 PX49> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error cd0 at ata0 bus 0 target 1 lun 0 cd0: <PHILIPS DVD+-RW SDVD8441 PX49> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error bge0: link UP Accounting enabled splash: image decoder found: logo_saver --FCuugMFkClbJLl1L Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg_no_acpi Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #7: Sat Jul 21 03:56:36 NOVST 2007 root@daria.lawndale.high:/usr/obj/usr/src/sys/DARIA Preloaded elf kernel "/boot/kernel/kernel" at 0xc07ff000. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc07ff200. Preloaded elf module "/boot/kernel/linux.ko" at 0xc07ff2ac. Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc07ff358. Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc07ff404. Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc07ff4b0. Preloaded elf module "/boot/kernel/if_bge.ko" at 0xc07ff55c. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07ff608. Preloaded elf module "/boot/kernel/snd_hda.ko" at 0xc07ff6b4. Preloaded elf module "/boot/kernel/sound.ko" at 0xc07ff760. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc07ff80c. Preloaded elf module "/boot/kernel/usb.ko" at 0xc07ff8b8. Preloaded elf module "/boot/kernel/umass.ko" at 0xc07ff960. Preloaded elf module "/boot/kernel/agp.ko" at 0xc07ffa0c. Preloaded elf module "/boot/kernel/random.ko" at 0xc07ffab4. Preloaded elf module "/boot/kernel/ata.ko" at 0xc07ffb60. Preloaded elf module "/boot/kernel/atapci.ko" at 0xc07ffc08. Preloaded elf module "/boot/kernel/atadisk.ko" at 0xc07ffcb4. Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc07ffd60. Preloaded elf module "/boot/kernel/atapicd.ko" at 0xc07ffe10. Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xc07ffebc. Preloaded elf module "/boot/kernel/kbdmux.ko" at 0xc07fff68. Preloaded elf module "/boot/kernel/sio.ko" at 0xc0800014. APIC: Could not find any APICs. Calibrating clock(s) ... i8254 clock: 1193177 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1696270510 Hz CPU: Intel(R) Pentium(R) M processor 1.70GHz (1696.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 526909440 (502 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000001ed66fff, 504635392 bytes (123202 pages) avail memory = 505921536 (482 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6550 bios32: Entry = 0xfd6f0 (c00fd6f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6f0+0x25e pnpbios: Found PnP BIOS data at 0xc00f65d0 pnpbios: Entry = f0000:adce Rev = 1.0 Other BIOS signatures found: io: <I/O> VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00 00 01 7b 00 00 01 3d 01 00 01 4f 01 00 01 7d 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 9 mode(s) found VESA: v3.0, 7872k memory, flags:0x1, mode table:0xc06ad740 (1000040) VESA: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS VESA: Intel Corporation Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> random: <entropy source, Software, Yarrow> kbd: new array size 4 kbd1 at kbdmux0 npx0: INT 16 interface cpu0 on motherboard est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f920 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) pcibios: BIOS version 2.10 pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2592, revid=0x04 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base b0080000, size 19, enabled map[14]: type 4, range 32, base 00001800, size 3, enabled map[18]: type 3, range 32, base c0000000, size 28, enabled map[1c]: type 1, range 32, base b0000000, size 18, enabled found-> vendor=0x8086, dev=0x2792, revid=0x04 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base 00000000, size 19, memory disabled found-> vendor=0x8086, dev=0x2668, revid=0x04 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base d000c000, size 14, enabled found-> vendor=0x8086, dev=0x2660, revid=0x04 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2662, revid=0x04 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2664, revid=0x04 bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2658, revid=0x04 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled found-> vendor=0x8086, dev=0x2659, revid=0x04 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled found-> vendor=0x8086, dev=0x265a, revid=0x04 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 00001860, size 5, enabled found-> vendor=0x8086, dev=0x265b, revid=0x04 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type 4, range 32, base 00001880, size 5, enabled found-> vendor=0x8086, dev=0x265c, revid=0x04 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base b0040000, size 10, enabled found-> vendor=0x8086, dev=0x2448, revid=0xd4 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2641, revid=0x04 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266f, revid=0x04 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001810, size 4, enabled found-> vendor=0x8086, dev=0x266a, revid=0x04 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 000018e0, size 5, enabled agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 10 at device 2.0 on pci0 agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000 agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000 agp0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xb0000000 agp0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000 agp0: detected 7932k stolen memory agp0: aperture size is 256M pci0: <display> at device 2.1 (no driver attached) pcm0: <Intel 82801F High Definition Audio Controller> mem 0xd000c000-0xd000ffff at device 27.0 on pci0 pcm0: TCSEL: 0x07 -> 0x00 pcm0: DMA Coherency: Uncacheable / vendor=0x8086 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd000c000 pcm0: hdac_irq_alloc: Unable to allocate irq device_attach: pcm0 attach returned 6 pcib1: <PCI-PCI bridge> irq 10 at device 28.0 on pci0 pcib1: secondary bus 9 pcib1: subordinate bus 9 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci9: <PCI bus> on pcib1 pci9: physical bus=9 pcib2: <PCI-PCI bridge> irq 10 at device 28.1 on pci0 pcib2: secondary bus 10 pcib2: subordinate bus 10 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff pci10: <PCI bus> on pcib2 pci10: physical bus=10 pcib3: <PCI-PCI bridge> irq 11 at device 28.2 on pci0 pcib3: secondary bus 2 pcib3: subordinate bus 4 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xfff00000-0xfffff pcib3: prefetched decode 0xfff00000-0xfffff pci2: <PCI bus> on pcib3 pci2: physical bus=2 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x189f irq 10 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0040000-0xb00403ff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xb0040000 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib4: <PCI-PCI bridge> at device 30.0 on pci0 pcib4: secondary bus 6 pcib4: subordinate bus 7 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xb0100000-0xb01fffff pcib4: prefetched decode 0xfff00000-0xfffff pcib4: Subtractively decoded bridge. pci6: <PCI bus> on pcib4 pci6: physical bus=6 found-> vendor=0x14e4, dev=0x169c, revid=0x03 bus=6, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 32, base b0100000, size 16, enabled pcib4: requested memory range 0xb0100000-0xb010ffff: good found-> vendor=0x104c, dev=0x8031, revid=0x00 bus=6, slot=7, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x31 (1470 ns), mingnt=0x44 (17000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0116000, size 12, enabled pcib4: requested memory range 0xb0116000-0xb0116fff: good found-> vendor=0x104c, dev=0x8032, revid=0x00 bus=6, slot=7, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0117000, size 11, enabled pcib4: requested memory range 0xb0117000-0xb01177ff: good map[14]: type 1, range 32, base b0110000, size 14, enabled pcib4: requested memory range 0xb0110000-0xb0113fff: good found-> vendor=0x104c, dev=0x8033, revid=0x00 bus=6, slot=7, func=3 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0114000, size 13, enabled pcib4: requested memory range 0xb0114000-0xb0115fff: good found-> vendor=0x8086, dev=0x4220, revid=0x05 bus=6, slot=8, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base b0118000, size 12, enabled pcib4: requested memory range 0xb0118000-0xb0118fff: good bge0: <Broadcom BCM5705 A3, ASIC rev. 0x3003> mem 0xb0100000-0xb010ffff irq 10 at device 6.0 on pci6 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xb0100000 miibus0: <MII bus> on bge0 brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 brgphy0: OUI 0x000818, model 0x001a, rev. 2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:16:36:d2:74:f3 bge0: [MPSAFE] pci6: <bridge, PCI-CardBus> at device 7.0 (no driver attached) pci6: <serial bus, FireWire> at device 7.2 (no driver attached) pci6: <mass storage> at device 7.3 (no driver attached) pci6: <network> at device 8.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 19 devices, largest 290 bytes PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1 PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1 PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1 PNP0c02: adding fixed memory32 range 0xfec10000-0xfec17fff, size=0x8000 PNP0c02: adding fixed memory32 range 0xfec18000-0xfec1ffff, size=0x8000 PNP0c02: adding fixed memory32 range 0xfec20000-0xfec27fff, size=0x8000 PNP0c02: adding fixed memory32 range 0xfec28000-0xfec2ffff, size=0x8000 PNP0c02: adding fixed memory32 range 0xfed00000-0xfed033ff, size=0x3400 PNP0c02: adding fixed memory32 range 0xfed20000-0xfed3ffff, size=0x20000 PNP0c02: adding fixed memory32 range 0xfed45000-0xfed8ffff, size=0x4b000 PNP0c02: adding fixed memory32 range 0xf0008000-0xf000bfff, size=0x4000 pnpbios: handle 0 device ID PNP0c02 (020cd041) PNP0c31: adding io range 0x4e-0x4f, size=0x2, align=0x1 PNP0c31: adding io range 0x1670-0x167f, size=0x10, align=0x1 PNP0c31: adding fixed memory32 range 0xfed40000-0xfed44fff, size=0x5000 pnpbios: handle 1 device ID PNP0c31 (310cd041) PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1 PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1 PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1 PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1 PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1 PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1 PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1 PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1 PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1 PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1 PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1 PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1 PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1 PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1 PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1 PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1 PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1 PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1 PNP0c02: adding io range 0x680-0x6ff, size=0x80, align=0x1 PNP0c02: adding io range 0x1640-0x164f, size=0x10, align=0x1 PNP0c02: adding fixed memory32 range 0xe0000000-0xefffffff, size=0x10000000 PNP0c02: adding fixed memory32 range 0xf0000000-0xf0003fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf0004000-0xf0004fff, size=0x1000 PNP0c02: adding fixed memory32 range 0xf0005000-0xf0005fff, size=0x1000 pnpbios: handle 2 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000 PNP0c01: adding fixed memory32 range 0x100000-0x1f6fffff, size=0x1f600000 pnpbios: handle 3 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 4 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 6 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 7 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 8 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 9 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 10 device ID PNP0800 (0008d041) PNP0c02: adding memory32 range 0xe0000-0xe17ff, size=0x1800, align=0x1800 pnpbios: handle 11 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0xfe00-0xfe01, size=0x2, align=0x1 pnpbios: handle 12 device ID PNP0c02 (020cd041) PNP0c02: adding memory32 range 0xdf800-0xdffff, size=0x800, align=0x800 pnpbios: handle 13 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 14 device ID PNP0a03 (030ad041) INT0800: adding fixed memory32 range 0xff000000-0xffffffff, size=0x1000000 pnpbios: handle 15 device ID INT0800 (0008d425) PNP0c02: adding fixed memory32 range 0xcf200-0xcffff, size=0xe00 pnpbios: handle 16 device ID PNP0c02 (020cd041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 17 device ID PNP0f13 (130fd041) HWPc224: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 HWPc224: adding irq mask 0x8 HWPc224: adding dma mask 0x2 pnpbios: handle 19 device ID HWPc224 (24c2f022) isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x801 0x801 0x801 0x801 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0 sio1: irq maps: 0x801 0x809 0x801 0x801 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0c31> failed to probe at port 0x4e-0x4f,0x1670-0x167f iomem 0xfed40000-0xfed44fff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0c02> at iomem 0xe0000-0xe17ff on isa0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0c02> at iomem 0xdf800-0xdffff on isa0 unknown: <INT0800> can't assign resources (memory) unknown: <INT0800> on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 unknown: <HWPc224> can't assign resources (port) unknown: <HWPc224> at port 0x2f8-0x2ff on isa0 ugen0: Broadcom Corp BCM92045NMD, rev 2.00/1.00, addr 2 ugen1: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2 Device configuration finished. Timecounter "TSC" frequency 1696270510 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH6 chip ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: setting UDMA33 on ICH6 chip ad0: 57231MB <WDC WD600UE-22KVT0 01.03K01> at ata0-master UDMA33 ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0acd0: setting PIO4 on ICH6 chip acd0: setting UDMA33 on ICH6 chip acd0: <PHILIPS DVD+/-RW SDVD8441/PX49> DVDR drive at ata0 as slave acd0: read 2067KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 32 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM unknown Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error pass0 at ata0 bus 0 target 1 lun 0 pass0: <PHILIPS DVD+-RW SDVD8441 PX49> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error cd0 at ata0 bus 0 target 1 lun 0 cd0: <PHILIPS DVD+-RW SDVD8441 PX49> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error bge0: link UP Accounting enabled splash: image decoder found: logo_saver cpufreq: frequency change with timecounter TSC not allowed, see cpufreq(4) --FCuugMFkClbJLl1L Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=sysctl_hw_acpi hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 0 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/85 C4/185 hw.acpi.cpu.cx_lowest: C1 hw.acpi.cpu.cx_usage: 100.00% 0.00% 0.00% 0.00% hw.acpi.acline: 1 hw.acpi.battery.life: 0 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 46,0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 93,0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 97,0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 --FCuugMFkClbJLl1L Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=sysctl_hw_acpi_errors ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND Accounting enabled ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00B] in namespace, AE_NOT_FOUND SearchNode 0xc32567e0 StartNode 0xc32567e0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc32566e0), AE_NOT_FOUND --FCuugMFkClbJLl1L--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070721192323.GA38759>