Date: Mon, 7 Dec 2009 14:59:04 -0600 From: Kurt Touet <ktouet@gmail.com> To: Pawel Jakub Dawidek <pjd@freebsd.org> Cc: freebsd-fs@freebsd.org Subject: Re: zpool create fails on gpart device Message-ID: <2a5e326f0912071259g840e88ejc9951137380d9f95@mail.gmail.com> In-Reply-To: <20091207204012.GD1795@garage.freebsd.pl> References: <2a5e326f0912061134s79c05e75td77e6874d409c675@mail.gmail.com> <20091207191048.GB1795@garage.freebsd.pl> <2a5e326f0912071203y35d45205n4566c1bb3260166d@mail.gmail.com> <20091207204012.GD1795@garage.freebsd.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Dec 7, 2009 at 2:40 PM, Pawel Jakub Dawidek <pjd@freebsd.org> wrote= : > On Mon, Dec 07, 2009 at 02:03:09PM -0600, Kurt Touet wrote: >> On Mon, Dec 7, 2009 at 1:10 PM, Pawel Jakub Dawidek <pjd@freebsd.org> wr= ote: >> > On Sun, Dec 06, 2009 at 01:34:13PM -0600, Kurt Touet wrote: >> >> I've been interested in using a gptzfsboot setup on a few of my >> >> systems, and thought I'd try it out in a VM first, but I'm blocked at >> >> creating a zpool. =A0Here's what I did: >> >> >> >> - create a new VM with 2 drives (da0 & da1) >> >> - install 8.0R amd64 >> >> - install subversion from sysinstall & checkout base/head >> >> - build & install -current >> >> >> >> Instead of creating a gptzfsboot install disc, I thought I'd just >> >> create the zpool on the second drive, install things to there, and >> >> then make the VM boot off the second drive afterwards (and remove the >> >> first). =A0I was following the >> >> http://blogs.freebsdish.org/lulf/2008/12/16/setting-up-a-zfs-only-sys= tem/ >> >> guide, and got to this stage: >> >> >> >> # gpart create -s GPT da1 >> >> # gpart add -b 34 -s 128 -t freebsd-boot da1 >> >> # gpart add -b 162 -s 5242880 -t freebsd-swap da1 >> >> # gpart add -b 5243042 -s 57671485 -t freebsd-zfs da1 >> >> # gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da1 >> >> >> >> # gpart show da1 >> >> =3D> =A0 =A0 =A034 =A062914493 =A0da1 =A0GPT =A0(30G) >> >> =A0 =A0 =A0 =A0 34 =A0 =A0 =A0 128 =A0 =A01 =A0freebsd-boot =A0(64K) >> >> =A0 =A0 =A0 =A0162 =A0 5242880 =A0 =A02 =A0freebsd-swap =A0(2.5G) >> >> =A0 =A05243042 =A057671485 =A0 =A03 =A0freebsd-zfs =A0(27G) >> >> >> >> # zpool create data /dev/da1p3 >> >> cannot create 'data': permission denied > > Ok, I guess this is HEAD, right? I think you just had bad luck. > > I break this here: > > =A0 =A0 =A0 =A0Date: Sat Dec =A05 14:24:22 2009 > =A0 =A0 =A0 =A0New Revision: 200125 > > And fixed here: > > =A0 =A0 =A0 =A0Date: Sat Dec =A05 20:16:28 2009 > =A0 =A0 =A0 =A0New Revision: 200158 > > It looks like you get the source from this window. > > Please rebuild with r200158 in place and retry. Sorry for the breakage. > > -- > Pawel Jakub Dawidek =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 http://ww= w.wheel.pl > pjd@FreeBSD.org =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 http:= //www.FreeBSD.org > FreeBSD committer =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 Am I Ev= il? Yes, I Am! > I think I managed to miss that -- I'm running FreeBSD 9.0-CURRENT #0 r200177 amd64. But, I will update again and see if that solves the problem.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2a5e326f0912071259g840e88ejc9951137380d9f95>