Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 3 Jan 2013 21:35:25 +0000 (UTC)
From:      Warren Block <wblock@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org
Subject:   svn commit: r245009 - stable/8/sbin/ifconfig
Message-ID:  <201301032135.r03LZPuQ088796@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: wblock (doc committer)
Date: Thu Jan  3 21:35:25 2013
New Revision: 245009
URL: http://svnweb.freebsd.org/changeset/base/245009

Log:
  MFC r242697,r242704:
  
  r242697:
  Add devd.conf(5) and devd(8) to SEE ALSO xrefs.  Give users a pointer to
  seemingly mysterious actions that are not done by ifconfig itself, but
  by devd triggering on events caused by ifconfig.
  
  r242704:
  Remove fifteen-year-old notes on media selection (suggested by simon@).
  Add commas after "e.g." and "i.e.".
  
  PR:		docs/173405

Modified:
  stable/8/sbin/ifconfig/ifconfig.8
Directory Properties:
  stable/8/sbin/ifconfig/   (props changed)

Modified: stable/8/sbin/ifconfig/ifconfig.8
==============================================================================
--- stable/8/sbin/ifconfig/ifconfig.8	Thu Jan  3 21:31:57 2013	(r245008)
+++ stable/8/sbin/ifconfig/ifconfig.8	Thu Jan  3 21:35:25 2013	(r245009)
@@ -28,7 +28,7 @@
 .\"     From: @(#)ifconfig.8	8.3 (Berkeley) 1/5/94
 .\" $FreeBSD$
 .\"
-.Dd March 7, 2012
+.Dd November 7, 2012
 .Dt IFCONFIG 8
 .Os
 .Sh NAME
@@ -142,7 +142,7 @@ The link-level
 address
 is specified as a series of colon-separated hex digits.
 This can be used to
-e.g.\& set a new MAC address on an ethernet interface, though the
+e.g.,\& set a new MAC address on an ethernet interface, though the
 mechanism used is not ethernet-specific.
 If the interface is already
 up when this option is used, it will be briefly brought down and
@@ -299,7 +299,7 @@ Specify interface FIB.
 A FIB
 .Ar fib_number
 is assigned to all frames or packets received on that interface.
-The FIB is not inherited, e.g. vlans or other sub-interfaces will use
+The FIB is not inherited, e.g., vlans or other sub-interfaces will use
 the default FIB (0) irrespective of the parent interface's FIB.
 The kernel needs to be tuned to support more than the default FIB
 using the
@@ -934,7 +934,7 @@ For example, if a device is capable of o
 with 802.11n and 802.11g then one can specify that g-only use
 should be used by specifying ``6:g''.
 Similarly the channel width can be specified by appending it
-with ``/''; e.g. ``6/40'' specifies a 40MHz wide channel,
+with ``/''; e.g., ``6/40'' specifies a 40MHz wide channel,
 These attributes can be combined as in: ``6:ht/40''.
 The full set of flags specified following a `:'' are:
 .Cm a
@@ -977,7 +977,7 @@ will operation on the channels, and the 
 can be used on a channel are defined by this setting.
 Country/Region codes are specified as a 2-character abbreviation
 defined by ISO 3166 or using a longer, but possibly ambiguous, spelling;
-e.g. "ES" and "Spain".
+e.g., "ES" and "Spain".
 The set of country codes are taken from /etc/regdomain.xml and can also
 be viewed with the ``list countries'' request.
 Note that not all devices support changing the country code from a default
@@ -994,7 +994,7 @@ DFS embodies several facilities includin
 radar signals, dynamic transmit power control, and channel selection
 according to a least-congested criteria.
 DFS support is mandatory for some 5GHz frequencies in certain
-locales (e.g. ETSI).
+locales (e.g., ETSI).
 By default DFS is enabled according to the regulatory definitions
 specified in /etc/regdomain.xml and the curent country code, regdomain,
 and channel.
@@ -1067,7 +1067,7 @@ Enable Dynamic WDS (DWDS) support.
 DWDS is a facility by which 4-address traffic can be carried between
 stations operating in infrastructure mode.
 A station first associates to an access point and authenticates using
-normal procedures (e.g. WPA).
+normal procedures (e.g., WPA).
 Then 4-address frames are passed to carry traffic for stations
 operating on either side of the wireless link.
 DWDS extends the normal WDS mechanism by leveraging existing security
@@ -1085,7 +1085,7 @@ When DWDS is enabled on a station, traff
 different from the peer station are encapsulated in a 4-address frame
 and transmitted to the peer.
 All 4-address traffic uses the security information of the stations
-(e.g. cryptographic keys).
+(e.g., cryptographic keys).
 A station is associated using 802.11n facilities may transport
 4-address traffic using these same mechanisms; this depends on available
 resources and capabilities of the device.
@@ -1135,7 +1135,7 @@ Stations negotiate use of these faciliti
 when they associate.
 To disable all use of 802.11n use
 .Fl ht .
-To disable use of HT20 (e.g. to force only HT40 use) use
+To disable use of HT20 (e.g., to force only HT40 use) use
 .Fl ht20 .
 To disable use of HT40 use
 .Fl ht40 .
@@ -1149,7 +1149,7 @@ Auto Channel Selection is used to locate
 HT configuration controls whether legacy, HT20, or HT40 operation is setup
 on the selected channel.
 If a fixed channel is specified for a station then HT configuration can
-be given as part of the channel specification; e.g. 6:ht/20 to setup
+be given as part of the channel specification; e.g., 6:ht/20 to setup
 HT20 operation on channel 6.
 .It Cm htcompat
 Enable use of compatibility support for pre-802.11n devices (default).
@@ -1405,13 +1405,13 @@ The default setting is 6 but drivers may
 they choose.
 .It Cm mcastrate Ar rate
 Set the rate for transmitting multicast/broadcast frames.
-Rates are specified as megabits/second in decimal; e.g.\& 5.5 for 5.5 Mb/s.
+Rates are specified as megabits/second in decimal; e.g.,\& 5.5 for 5.5 Mb/s.
 This rate should be valid for the current operating conditions;
 if an invalid rate is specified drivers are free to chose an
 appropriate rate.
 .It Cm mgtrate Ar rate
 Set the rate for transmitting management and/or control frames.
-Rates are specified as megabits/second in decimal; e.g.\& 5.5 for 5.5 Mb/s.
+Rates are specified as megabits/second in decimal; e.g.,\& 5.5 for 5.5 Mb/s.
 .It Cm outdoor
 Set the location to use in calculating regulatory constraints.
 The location is also advertised in beacon and probe response frames
@@ -1571,7 +1571,7 @@ request can be used to show recent scan 
 initiating a new scan.
 .It Cm scanvalid Ar threshold
 Set the maximum time the scan cache contents are considered valid;
-i.e. will be used without first triggering a scan operation to
+i.e., will be used without first triggering a scan operation to
 refresh the data.
 The
 .Ar threshold
@@ -1633,7 +1633,7 @@ When operating with TDMA, setup a BSS wi
 slots.
 The slot count may be at most 8.
 The current implementation is only tested with two stations
-(i.e. point to point applications).
+(i.e., point to point applications).
 This setting is only meaningful when a station is configured as slot 0;
 other stations adopt this setting from the BSS they join.
 By default
@@ -1657,7 +1657,7 @@ is set to 10 milliseconds.
 When operating with TDMA, setup a BSS such that beacons are transmitted every
 .Ar intval
 superframes to synchronize the TDMA slot timing.
-A superframe is defined as the number of slots times the slot length; e.g.
+A superframe is defined as the number of slots times the slot length; e.g.,
 a BSS with two slots of 10 milliseconds has a 20 millisecond superframe.
 The beacon interval may not be zero.
 A lower setting of
@@ -1683,7 +1683,7 @@ the driver will use the setting closest 
 Not all adapters support changing the transmit power.
 .It Cm ucastrate Ar rate
 Set a fixed rate for transmitting unicast frames.
-Rates are specified as megabits/second in decimal; e.g.\& 5.5 for 5.5 Mb/s.
+Rates are specified as megabits/second in decimal; e.g.,\& 5.5 for 5.5 Mb/s.
 This rate should be valid for the current operating conditions;
 if an invalid rate is specified drivers are free to chose an
 appropriate rate.
@@ -2490,9 +2490,6 @@ The
 flag disables this behavior.
 .Pp
 Only the super-user may modify the configuration of a network interface.
-.Sh NOTES
-The media selection system is relatively new and only some drivers support
-it (or have need for it).
 .Sh EXAMPLES
 Assign the IPv4 address
 .Li 192.0.2.10 ,
@@ -2568,7 +2565,9 @@ tried to alter an interface's configurat
 .Xr pfsync 4 ,
 .Xr polling 4 ,
 .Xr vlan 4 ,
+.Xr devd.conf 5 ,
 .\" .Xr eon 5 ,
+.Xr devd 8 ,
 .Xr rc 8 ,
 .Xr routed 8 ,
 .Xr jail 8 ,



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201301032135.r03LZPuQ088796>