Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 28 Dec 2005 16:16:28 -0800
From:      FreeBsdBeni <freebsdbeni@spymac.com>
To:        freebsd-questions@freebsd.org
Subject:   Re: dvd drive
Message-ID:  <200512281616.32589.freebsdbeni@spymac.com>
In-Reply-To: <B8F6F165-407E-4CDE-B884-F47102BCA653@redry.net>
References:  <244E8E94-A4F7-48B9-B527-06EF505B3BC9@redry.net> <ab3b3690512280700jb396abdha5e000222066b08c@mail.gmail.com> <B8F6F165-407E-4CDE-B884-F47102BCA653@redry.net>

next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart1533990.cebKsZ2pIN
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

On Wednesday 28 December 2005 07:08, eoghan wrote:
> On 28 Dec 2005, at 15:00, Roshan wrote:
> > On 12/28/05, eoghan <freebsd@redry.net> wrote:
> >> On 28 Dec 2005, at 15:55, Tofik Suleymanov wrote:
> >>> eoghan wrote:
> >>>> Hello
> >>>> Im wondering how to tell freeBSD about my 2 dvd drives. k3b
> >>>> automatically detects them but it hasnt found either.
> >>>> Thanks
> >>>> Eoghan
> >>>> _______________________________________________
> >>>> freebsd-questions@freebsd.org mailing list
> >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> >>>> To unsubscribe, send any mail to "freebsd-questions-
> >>>> unsubscribe@freebsd.org"
> >>>
> >>> Post your dmesg output here.
> >>
> >> I have copied it below, thanks:
> >>
> >> Copyright (c) 1992-2005 The FreeBSD Project.
> >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
> >> 1993, 1994
> >>          The Regents of the University of California. All rights
> >> reserved.
> >> FreeBSD 6.0-RELEASE #0: Sun Dec  4 17:43:10 UTC 2005
> >>      root@nathaniel:/usr/obj/usr/src/sys/GENERIC
> >> Timecounter "i8254" frequency 1193182 Hz quality 0
> >> CPU: Intel(R) Pentium(R) 4 CPU 1400MHz (1395.76-MHz 686-class CPU)
> >>    Origin =3D "GenuineIntel"  Id =3D 0xf07  Stepping =3D 7
> >>
> >> Features=3D0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M
> >> CA,
> >> CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> >> real memory  =3D 402157568 (383 MB)
> >> avail memory =3D 384102400 (366 MB)
> >> npx0: [FAST]
> >> npx0: <math processor> on motherboard
> >> npx0: INT 16 interface
> >> acpi0: <DELL DIM 8100> on motherboard
> >> acpi0: Power Button (fixed)
> >> pci_link0: <ACPI PCI Link LNKA> irq 3 on acpi0
> >> pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
> >> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
> >> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
> >> pci_link4: <ACPI PCI Link LNKE> on acpi0
> >> pci_link5: <ACPI PCI Link LNKF> on acpi0
> >> pci_link6: <ACPI PCI Link LNKG> on acpi0
> >> pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0
> >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> >> cpu0: <ACPI CPU> on acpi0
> >> acpi_button0: <Power Button> on acpi0
> >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> >> pci0: <ACPI PCI bus> on pcib0
> >> agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xefffffff at
> >> device 0.0 on pci0
> >> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> >> pci1: <PCI bus> on pcib1
> >> pci1: <display, VGA> at device 0.0 (no driver attached)
> >> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> >> pci2: <ACPI PCI bus> on pcib2
> >> fwohci0: <VIA Fire II (VT6306)> port 0xec80-0xecff mem
> >> 0xff1ff800-0xff1fffff irq 10 at device 8.0 on pci2
> >> fwohci0: OHCI version 1.0 (ROM=3D1)
> >> fwohci0: No. of Isochronous channels is 8.
> >> fwohci0: EUI64 00:11:06:00:00:99:d9:eb
> >> fwohci0: Phy 1394a available S400, 3 ports.
> >> fwohci0: Link S400, max_rec 2048 bytes.
> >> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> >> fwe0: <Ethernet over FireWire> on firewire0
> >> if_fwe0: Fake Ethernet address: 02:11:06:99:d9:eb
> >> fwe0: Ethernet address: 02:11:06:99:d9:eb
> >> fwe0: if_start running deferred for Giant
> >> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> >> fwohci0: Initiate bus reset
> >> fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
> >> firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
> >> firewire0: bus manager 0 (me)
> >> pci2: <multimedia, audio> at device 10.0 (no driver attached)
> >> pci2: <simple comms> at device 11.0 (no driver attached)
> >> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem
> >> 0xff1ff400-0xff1ff47f irq 11 at device 12.0 on pci2
> >> miibus0: <MII bus> on xl0
> >> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> >> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> >> xl0: Ethernet address: 00:b0:d0:e7:e9:7d
> >> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> >> isa0: <ISA bus> on isab0
> >> atapci0: <Intel ICH2 UDMA100 controller> port
> >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1
> >> on pci0
> >> ata0: <ATA channel 0> on atapci0
> >> ata1: <ATA channel 1> on atapci0
> >> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
> >> 0xff80-0xff9f irq 11 at device 31.2 on pci0
> >> uhci0: [GIANT-LOCKED]
> >> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
> >> usb0: USB revision 1.0
> >> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >> uhub0: 2 ports with 2 removable, self powered
> >> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> >> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
> >> 0xff60-0xff7f irq 9 at device 31.4 on pci0
> >> uhci1: [GIANT-LOCKED]
> >> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
> >> usb1: USB revision 1.0
> >> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >> uhub1: 2 ports with 2 removable, self powered
> >> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> >> acpi0
> >> fdc0: [FAST]
> >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> >> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> >> kbd0 at atkbd0
> >> atkbd0: [GIANT-LOCKED]
> >> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> >> psm0: [GIANT-LOCKED]
> >> psm0: model IntelliMouse, device ID 3
> >> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
> >> on acpi0
> >> sio0: type 16550A
> >> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7
> >> on acpi0
> >> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> >> ppc0: FIFO with 16/16/8 bytes threshold
> >> ppbus0: <Parallel port bus> on ppc0
> >> plip0: <PLIP network interface> on ppbus0
> >> lpt0: <Printer> on ppbus0
> >> lpt0: Interrupt-driven port
> >> ppi0: <Parallel I/O> on ppbus0
> >> pmtimer0 on isa0
> >> orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff
> >> on isa0
> >> sc0: <System console> at flags 0x100 on isa0
> >> sc0: VGA <16 virtual consoles, flags=3D0x300>
> >> sio1: configured irq 3 not in bitmap of probed irqs 0
> >> sio1: port may not be enabled
> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> >> isa0
> >> Timecounter "TSC" frequency 1395762544 Hz quality 800
> >> Timecounters tick every 1.000 msec
> >> ad0: FAILURE - SET_MULTI status=3D51<READY,DSC,ERROR> error=3D4<ABORTE=
D>
> >> ad0: 19470MB <QUANTUM FIREBALLlct20 20 APL.0900> at ata0-master
> >> UDMA100
> >> ad1: 78167MB <Maxtor 4R080J0 RAMB1TU0> at ata0-slave UDMA100
> >> acd0: DVDROM <NEC DV-5800A/1.07> at ata1-master UDMA33
> >> acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
> >> Trying to mount root from ufs:/dev/ad0s1a
> >>
> >> _______________________________________________
> >> freebsd-questions@freebsd.org mailing list
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> >> To unsubscribe, send any mail to "freebsd-questions-
> >> unsubscribe@freebsd.org"
> >
> > I can see that the drives have been detected as acd0 and acd1 and
> > everything seems to be working normally.
> >
> > Can you describe your problem in more detail ?
> >
> > Are you not able to mount a data cd-rom when then latter  is in the
> > drive?
> >
> > Have you created  mount points for your cd-rom drives e.g /cdrom and
> > /cdrom1 and tried mounting them ?
> >
> >
> > Roshan
>
> Hi Roshan
> Im using K3b, and its not seeing either drive. If I try add it like /
> dev/acd0 or /dev/acd1 it says it could not find additional device.
> I have not created mount points. The docs go through this is guess?
> Thanks
> Eoghan
>

See also the /usr/ports/sysutils/k3b/pkg-message5 about the use of k3b.
=2D-=20
Beni.

--nextPart1533990.cebKsZ2pIN
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (FreeBSD)

iD8DBQBDsyrg98oeEzEDrEcRAu6IAJ4xAqsrIsOyCKNtRQ3ZfTHkAFZhGQCglPnz
r9qc5OSDRfos+0bYQnsnJMk=
=RNTH
-----END PGP SIGNATURE-----

--nextPart1533990.cebKsZ2pIN--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200512281616.32589.freebsdbeni>