Date: Thu, 18 Feb 1999 15:38:26 +0100 From: tobi@bland.fido.de (Tobias Ernst) To: freebsd-isdn@freebsd.org (UUCP) Subject: Re: Elsa PCC-16 Message-ID: <MSGID_242=3A7600=2F1_36cc3557@Fido.DE> In-Reply-To: <MSGID_242=3A4900=2F99.0_6ca5c4e1@Fido.DE>
next in thread | previous in thread | raw e-mail | index | archive | help
Hallo Gary!
Sorry for my delayed answer, I have been ill for the last few days.
GJ> can you post the dmesg output ?
It's nothing more than I said, "isic0 not found at 0x360", but I'll attach the
complete output below.
GJ> Is this your only card ?
Yes (that's why I want to have it back when it's done, because otherwise it
does not make much sense to develop a driver for it, if nobody needs it ...
<g>), but I can live without for I while, I have an ISDN terminal adapter for
accessing the net in the meantime.
GJ> I'd be willing to look into it if you want
GJ> to send the card to me. Send me a private eMail.
OK.
Viele Gruesse,
Tobias
----- dmesg.txt begins -----
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.8-RELEASE #0: Thu Feb 18 09:39:48 CET 1999
tobi@romulus.bland.fido.de:/usr/src/sys/compile/ROMULUS-ISDN
CPU: Pentium/P54C (100.23-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
FreeBSD Kernel Configuration Utility - Version 1.1
Type "help" for help.
config> intro
config>
config> exit
avail memory = 30392320 (29680K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=1106 device=0598 subclass=0)> rev 4 on
pci0:0:0
chip1 <generic PCI bridge (vendor=1106 device=8598 subclass=4)> rev 0 on
pci0:1:0
chip2 <generic PCI bridge (vendor=1106 device=0586 subclass=1)> rev 65 on
pci0:7:0
pci0:7:1: VIA Technologies, device=0x0571, class=storage (ide) [no driver
assigned]
chip3 <generic PCI bridge (vendor=1106 device=3040 subclass=128)> rev 16 on
pci0:7:3
ncr0 <ncr 53c810a fast10 scsi> rev 18 int a irq 11 on pci0:8:0
ncr0 waiting for scsi devices to settle
(ncr0:0:0): "IBM DORS-32160 WA6A" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 8)
2063MB (4226725 512 byte sectors)
(ncr0:1:0): "TANDBERG TDC 3800 =07:" type 1 removable SCSI 2
st0(ncr0:1:0): Sequential-Access
st0(ncr0:1:0): asynchronous.
density code 0x0, drive empty
(ncr0:5:0): "IOMEGA ZIP 100 N*32" type 0 removable SCSI 2
sd1(ncr0:5:0): Direct-Access
sd1(ncr0:5:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB
sd1 could not mode sense (4). Using fictitious geometry
96MB (196608 512 byte sectors)
(ncr0:6:0): "PIONEER CD-ROM DRM-624X 1.08" type 5 removable SCSI 2
cd0(ncr0:6:0): CD-ROM can't get the size
(ncr0:6:1): "PIONEER CD-ROM DRM-624X 1.08" type 5 removable SCSI 2
cd1(ncr0:6:1): CD-ROM can't get the size
(ncr0:6:2): "PIONEER CD-ROM DRM-624X 1.08" type 5 removable SCSI 2
cd2(ncr0:6:2): CD-ROM can't get the size
(ncr0:6:3): "PIONEER CD-ROM DRM-624X 1.08" type 5 removable SCSI 2
cd3(ncr0:6:3): CD-ROM can't get the size
(ncr0:6:4): "PIONEER CD-ROM DRM-624X 1.08" type 5 removable SCSI 2
cd4(ncr0:6:4): CD-ROM can't get the size
(ncr0:6:5): "PIONEER CD-ROM DRM-624X 1.08" type 5 removable SCSI 2
cd5(ncr0:6:5): CD-ROM can't get the size
vga0 <VGA-compatible display device> rev 0 int a irq ?? on pci0:10:0
Probing for devices on PCI bus 1:
Probing for PnP devices:
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x320-0x33f irq 15 on isa
ed0: address 00:00:b4:82:6c:6b, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
aha0 not found at 0x134
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST3250A-XR>
wd0: 204MB (417792 sectors), 1024 cyls, 12 heads, 34 S/T, 512 B/S
isic0 not found at 0x360
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
Intel Pentium F00F detected, installing workaround
i4b: ISDN call control device attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4bctl: ISDN system control port attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4btrc: 4 ISDN trace device(s) attached
IP packet filtering initialized, divert enabled, unlimited logging
----- dmesg.txt ends -----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MSGID_242=3A7600=2F1_36cc3557>