Date: Mon, 3 May 2010 10:29:32 -0400 From: John Baldwin <jhb@freebsd.org> To: newuse@qip.ru Cc: freebsd-acpi@freebsd.org Subject: Re: Power OFF button on very old motherboard with FreeBSD 7.2 Message-ID: <201005031029.32144.jhb@freebsd.org> In-Reply-To: <3f9f8adcca03275eee26921bc0d57aefc4d52f2a@mail.qip.ru> References: <3f9f8adcca03275eee26921bc0d57aefc4d52f2a@mail.qip.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 02 May 2010 9:12:15 pm newuse@qip.ru wrote: > Hallow, I am new in any mailing lists and I unfortunately don't know how to post as a followup :(( > But ther is an error in dump: > # acpidump -t > acpidump: Can't find ACPI information > > I think it is because the dump is not supported by my kernel :( Hmm, does acpidump work under 4.x? We have to be able to find the ACPI tables to support soft-off via the power button. > On Friday 30 April 2010 2:22:09 pm newuse@qip.ru wrote: > > Can you try booting with 'hint.apic.0.disabled=1' set in loader.conf? Also, > > if you could obtain a full dmesg that would be helpful. > > Can you please get the output of acpidump -t and post it to the mailing list > as a followup? > > > -- > > John Baldwin > > > > Thank you, I add "hint.apic.0.disabled=1" (without "") to the end of > loader.conf, now it looks like: > > acpi_load="YES" > > apm_load="YES" > > alias_ftp_load="YES" > > hint.apic.0.disabled=1 > > > > my fulll DMESG: > > # dmesg > > Copyright (c) 1992-2009 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD is a registered trademark of The FreeBSD Foundation. > > FreeBSD 7.2-RELEASE #10: Thu Mar 25 05:42:27 MSK 2010 > > root@NewUse.vesnet.net:/usr/obj/usr/src/sys/MYKNL > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x652 Stepping = 2 > > Features=0x183f9ff > > real memory = 134217728 (128 MB) > > avail memory = 121806848 (116 MB) > > kbd1 at kbdmux0 > > ACPI Error (tbxfroot-0308): A valid RSDP was not found [20070320] > > ACPI: Table initialisation failed: AE_NOT_FOUND > > ACPI: Try disabling either ACPI or apic support. > > pcib0: pcibus 0 on motherboard > > pir0: on motherboard > > pci0: on pcib0 > > agp0: on hostb0 > > pcib1: at device 1.0 on pci0 > > pci1: on pcib1 > > isab0: at device 7.0 on pci0 > > isa0: on isab0 > > atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device > 7.1 on pci0 > > ata0: on atapci0 > > ata0: [ITHREAD] > > ata1: on atapci0 > > ata1: [ITHREAD] > > uhci0: port 0xde00-0xde1f irq 11 at device 7.2 on pci0 > > uhci0: [GIANT-LOCKED] > > uhci0: [ITHREAD] > > usb0: on uhci0 > > usb0: USB revision 1.0 > > uhub0: on usb0 > > uhub0: 2 ports with 2 removable, self powered > > intsmb0: port 0x440-0x44f at device 7.3 on pci0 > > intsmb0: intr IRQ 9 enabled revision 0 > > intsmb0: [GIANT-LOCKED] > > intsmb0: [ITHREAD] > > intsmb0: PM I/O mapped 400 > > smbus0: on intsmb0 > > smb0: on smbus0 > > pcm0: port 0xdc00-0xdc3f irq 11 at device 14.0 on pci0 > > pcm0: > > pcm0: [ITHREAD] > > pcm0: > > rl0: port 0xda00-0xdaff mem 0xefffbf00-0xefffbfff irq 10 at device 16.0 on > pci0 > > miibus0: on rl0 > > rlphy0: PHY 0 on miibus0 > > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > rl0: Ethernet address: 00:80:48:38:3a:3d > > rl0: [ITHREAD] > > rl1: port 0xd800-0xd8ff mem 0xefffbe00-0xefffbeff irq 9 at device 18.0 on > pci0 > > miibus1: on rl1 > > rlphy1: PHY 0 on miibus1 > > rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > rl1: Ethernet address: 00:18:e7:09:0f:09 > > rl1: [ITHREAD] > > rl2: port 0xd600-0xd6ff mem 0xefffbd00-0xefffbdff irq 11 at device 20.0 on > pci0 > > miibus2: on rl2 > > rlphy2: PHY 0 on miibus2 > > rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > rl2: Ethernet address: 00:11:95:5b:8e:7a > > rl2: [ITHREAD] > > cpu0 on motherboard > > pmtimer0 on isa0 > > atkbdc0: at port 0x60,0x64 on isa0 > > atkbd0: irq 1 on atkbdc0 > > kbd0 at atkbd0 > > atkbd0: [GIANT-LOCKED] > > atkbd0: [ITHREAD] > > fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > > fdc0: [FILTER] > > fd0: > > > > -- > John Baldwin > > > -- John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201005031029.32144.jhb>