Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 23 Sep 2001 15:33:52 -0400
From:      "Andrew C. Hornback" <achornback@worldnet.att.net>
To:        "Jamie Hermans" <freebsd@hermans.ca>, "'Gabriel Rossetti'" <rossettigab@tiscalinet.ch>, <freebsd-questions@FreeBSD.ORG>
Subject:   RE: Compaq Smart-2/E array controller error
Message-ID:  <00aa01c14466$ad326ac0$0e00000a@tomcat>
In-Reply-To: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA4ARCbw3TTESKv%2BM3sR%2BDvsKAAAAQAAAAOYkv0Ng56EW8qB1/4StKyQEAAAAA@hermans.ca>

next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message-----
> From: owner-freebsd-questions@FreeBSD.ORG
> [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Jamie Hermans
> Sent: Sunday, September 23, 2001 3:03 AM
> To: 'Gabriel Rossetti'; freebsd-questions@FreeBSD.ORG
> Subject: RE: Compaq Smart-2/E array controller error
>
> > -----Original Message-----
> > From: owner-freebsd-questions@FreeBSD.ORG On Behalf Of Gabriel
> Rossetti
> > Sent: Saturday, September 22, 2001 2:09 pm
> > To: freebsd-questions@FreeBSD.ORG
> > Subject: Compaq Smart-2/E array controller error
> >
> > Hello,
> >
> > I have a Compaq Smart-2/E array controller (rev A, v2.14) on my
> > prosignia server. I have tried to install FreeBSD 3.4, 4.0, 4.1,
> > and 4.3 on it but it crashes. I get a memory dump after the device
> > configuration, right when it finds the controller. It has the
> > following processor(the controller):
>
> Hi Gabriel...
>
> If you search the archives, you will notice that *I* had the exact
> same issue.  There is no longer support for the Smart-2/E controller
> (or more generally, the EISA version of this controller.)
>
> My "solution" was to dig around for a PCI version of the controller,
> which IS supported.
>
> # dmesg | grep ida
> ida0: <Compaq SMART-2/P array controller> port 0x8000-0x80ff mem
> 0x42000000-0x43ffffff,0x40000000-0x400000ff irq 11 at device 0.0 on pci1
> ida0: drives=2 firm_rev=4.48
> idad0: <Compaq Logical Drive> on ida0
> idad0: 12279MB (25149120 sectors), blocksize=512
> idad1: <Compaq Logical Drive> on ida0
> idad1: 24563MB (50306400 sectors), blocksize=512
> Mounting root from ufs:/dev/idad0s1a

	Jamie,

	I remember trying to help you with that problem when you asked about it.

	As far as the EISA version of RAID Controllers, I'm not sure that there are
(or ever have been) any drivers for any of them.  I had to go to Solaris 7
to find drivers for my Mylex EISA RAID controller, and you weren't able to
get that Compaq EISA controller working.

--- Andy


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00aa01c14466$ad326ac0$0e00000a>