Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 17 Jul 2016 16:44:26 +0100
From:      Arthur Chance <freebsd@qeng-ho.org>
To:        "William A. Mahaffey III" <wam@hiwaay.net>, freebsd-questions@freebsd.org
Subject:   Re: High CPU temperature and high fans level
Message-ID:  <899e0044-6016-4b47-aade-5d701766c0e0@qeng-ho.org>
In-Reply-To: <2ab232fb-0476-a5be-a9ad-14b9c63adcef@hiwaay.net>
References:  <CAO%2BPfDe_Bs=OyN39UxKpSGt1RnCKiYxAOFCW5P=VtmYmmtkGuw@mail.gmail.com> <20160717002508.591a61ce.freebsd@edvax.de> <CAO%2BPfDeLiavM%2BDQpvR0Sf=wG7NK6LByO7XddKED85WLNDAxCLA@mail.gmail.com> <2ab232fb-0476-a5be-a9ad-14b9c63adcef@hiwaay.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On 17/07/2016 13:48, William A. Mahaffey III wrote:
> On 07/17/16 05:05, David Demelier wrote:
>> 2016-07-17 0:25 GMT+02:00 Polytropon <freebsd@edvax.de>:
>>> On Sun, 17 Jul 2016 00:06:07 +0200, David Demelier wrote:
>>>> Hello,
>>>>
>>>> I was trying FreeBSD 10.3 on my laptop (hp probook 4510s) and was
>>>> surprised
>>>> to see high CPU temperature and fans running high.
>>>>
>>>> No apps running, I get a temperature of 57C in dev.cpu.x.temperature
>>>> and
>>>> fans run high (not able to get rpms).
>>>>
>>>> On a 4.6.3 Linux distro I get an average of 48C and fans are quite low.
>>>>
>>>> Both tests were kept in tty. No Xorg running just a boot and user
>>>> login in
>>>> console.
>>>>
>>>> Do you have any clue?
>>> Did you enable powerd? It can slow down the CPU when the system
>>> is idle, and increase the CPU speed when needed. This should have
>>> an effect on CPU temperature and fan speed.
>>>
>> Yes, I had powerd enabled, I tried -a adaptive, -a hiadaptive as
>> suggested by Erich but it seems that only -a min has some little
>> effect. I could get a temperature of 52C. I've tested back on Linux
>> and I got an average much lower (41C).
>>
>> By the way the other sensors in hw.acpi.tz* are also much higher than
>> Linux (using lm_sensors). The highest value is my tz5 which is at 78C
>> almost 5 seconds after boot while the maximum tz value in Linux
>> sensors is 55.
>>
>> I have no idea what's wrong. :(
>>
> 
> I have had issues w/ FreeBSD apparently not reporting accurate temps on
> this box, AMD jaguar desktop, FreeBSD 9.3R. YMMV & all that rot ....
> 

Ditto. This is a small and old Atom based Zotac system running 10.2:

root@zotac:0# sysctl dev.cpu|grep temperature
dev.cpu.3.temperature: 24.0C
dev.cpu.2.temperature: 24.0C
dev.cpu.1.temperature: 27.0C
dev.cpu.0.temperature: 27.0C

The digital thermometer right next to it is reporting 33.9C in my office
(we're having a hot spell by our standards). There's no way the CPU can
be colder than the ambient temperature.



-- 
Moore's Law of Mad Science: Every eighteen months, the minimum IQ
necessary to destroy the world drops by one point.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?899e0044-6016-4b47-aade-5d701766c0e0>