Date: Thu, 04 May 2000 22:37:26 +0800 From: Trent Nelson <tpnelson@echidna.stu.cowan.edu.au> To: tsikora@powerusersbbs.com Cc: Trent Nelson <tpnelson@echidna.stu.cowan.edu.au>, "current@FreeBSD.ORG" <current@FreeBSD.ORG> Subject: Re: can't assign resources Message-ID: <39118B26.373911D3@student.cowan.edu.au> References: <39107973.F528306C@home.com> <3910EF86.1B3B5981@student.cowan.edu.au> <39111A01.44BBE15A@home.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------C9DFBD0703A50F0613FAF78E
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Ted Sikora wrote:
> Your right the addresses seem to be standard machine resources. Are you
> using SMP? The irq's are remapped on a SMP machine so maybe that's were
> the trouble lies? The PNP tag is what has me stumped. I replaced the isa
> cards with pci this evening out of curiosity...same thing.
Nope, I'm using a UP kernel. Like you mention, I've also taken out my
only PCI card (fxp) and disabled the sound interface via the BIOS and I
get the same thing. I've toggled the `PnP OS' flag in my BIOS as well
which doesn't do anything.
From what you've said and what I've experienced; I'm even more
convinced the problem's nothing to do with ISA/PCI devices. I'm going to
have a look at the code a bit more later on tonight...
Another interesting point is the dmesg I get now after I set "int
bootverbose" to '1' in `/usr/src/sys/i386/i386/machdep.c'. I'd really
love to hear from a coding-type figure that could determine the severity
of a lot of the error messages reported.
Ted, would it be possible to see a copy of your kernel? Also, what
motherboard do you have?
Are there any other coding-type figures actually following this thread?
> Ted Sikora
> Jtl Development Group
> tsikora@powerusersbbs.com
Regards,
Trent.
(dmesg w/ bootverbose=1 attached, please take a look!)
--------------C9DFBD0703A50F0613FAF78E
Content-Type: text/plain; charset=iso-8859-1;
name="dmesg.bootverbose"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline;
filename="dmesg.bootverbose"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Wed May 3 21:26:09 WST 2000
root@breaker.org:/usr/src/sys/compile/breaker_03May2000
Calibrating clock(s) ... TSC clock: 232779341 Hz, i8254 clock: 1193149 Hz=
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (232.79-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x633 Stepping =3D 3
Features=3D0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA=
,CMOV,MMX>
real memory =3D 66977792 (65408K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00372000 - 0x03fd7fff, 63332352 bytes (15462 pages)
avail memory =3D 60895232 (59468K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb60
bios32: Entry =3D 0xfdb70 (c00fdb70) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xdb91
pnpbios: Found PnP BIOS data at 0xc00f5ff0
pnpbios: Entry =3D f0000:5904 Rev =3D 1.0
Other BIOS signatures found:
ACPI: 000fa050
Preloaded elf kernel "kernel" at 0xc0359000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=3D0x8086, dev=3D0x7190, revid=3D0x03
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[10]: type 1, range 32, base f8000000, size 26, enabled
found-> vendor=3D0x8086, dev=3D0x7191, revid=3D0x03
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
subordinatebus=3D1 secondarybus=3D1
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
subordinatebus=3D0 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[20]: type 1, range 32, base 0000ffa0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Dd, irq=3D10
map[20]: type 1, range 32, base 0000ef80, size 5, enabled
found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x02
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[90]: type 1, range 32, base 00000440, size 4, enabled
found-> vendor=3D0x1274, dev=3D0x1371, revid=3D0x06
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D9
map[10]: type 1, range 32, base 0000ef00, size 6, enabled
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x08
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D9
map[10]: type 1, range 32, base febff000, size 12, enabled
map[14]: type 1, range 32, base 0000ee80, size 6, enabled
map[18]: type 1, range 32, base fea00000, size 20, enabled
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci=
0
found-> vendor=3D0x10de, dev=3D0x0020, revid=3D0x04
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D11
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base f3000000, size 24, enabled
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT graphics accelerator> (vendor=3D0x10de, dev=3D0x00=
20) at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 =
on pci0
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xffa0
ata0: mask=3D03 status0=3D50 status1=3D50
ata0: mask=3D03 status0=3D50 status1=3D50
ata0: devices =3D 0x3
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xffa8
ata1: mask=3D03 status0=3D50 status1=3D50
ata1: mask=3D03 status0=3D00 status1=3D00
ata1: devices =3D 0xc
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 1=
0 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq =
9 at device 7.3 on pci0
intpm0: I/O mapped 440
intpm0: intr IRQ 9 enabled revision -1072283136
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 400 =
pcm0: <AudioPCI ES1371> port 0xef00-0xef3f irq 9 at device 12.0 on pci0
pcm0: ac97 codec id 0x43525903
pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 6 bit master=
volume, =
using shared irq9.
pcm: setmap 3dd0000, 1000; 0xc1f86000 -> 3dd0000
pcm: setmap 3dd5000, 1000; 0xc1f8b000 -> 3dd5000
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xee80-0xeebf mem 0x=
fea00000-0xfeafffff,0xfebff000-0xfebfffff irq 9 at device 14.0 on pci0
fxp0: Ethernet address 00:04:ac:53:46:dd
fxp0: supplying EUI64: 00:04:ac:ff:fe:53:46:dd
bpf: fxp0 attached
pnpbios: 17 devices, largest 194 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=3D0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=3D0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=3D0x20000
PNP0c01: adding fixed memory32 range 0x3fe0000-0x3ff7fff, size=3D0x18000
PNP0c01: adding fixed memory32 range 0x3ff8000-0x3ffffff, size=3D0x8000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=3D0x1000=
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=3D0x1000=
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=3D0x8000=
0
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0x100000-0x3fdffff, size=3D0x3ee0000=
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0000: adding io range 0x20-0x21, size=3D0x2, align=3D0x1
PNP0000: adding io range 0xa0-0xa1, size=3D0x2, align=3D0x1
PNP0000: adding irq mask 00x4
PNP0000: end config
pnpbios: handle 2 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=3D0x10, align=3D0x1
PNP0200: adding io range 0x80-0x90, size=3D0x11, align=3D0x1
PNP0200: adding io range 0x94-0x9f, size=3D0xc, align=3D0x1
PNP0200: adding io range 0xc0-0xde, size=3D0x1f, align=3D0x1
PNP0200: end config
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 00x1
PNP0100: adding io range 0x40-0x43, size=3D0x4, align=3D0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=3D0x2, align=3D0x1
PNP0b00: end config
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 00x2
PNP0303: adding io range 0x60-0x60, size=3D0x1, align=3D0x1
PNP0303: adding io range 0x64-0x64, size=3D0x1, align=3D0x1
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=3D0x1, align=3D0x1
PNP0800: end config
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=3D0x10, align=3D0x1
PNP0c04: end config
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=3D0x2, align=3D0x1
PNP0c02: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0x1
PNP0c02: adding io range 0x10-0x1f, size=3D0x10, align=3D0x1
PNP0c02: adding io range 0x22-0x3f, size=3D0x1e, align=3D0x1
PNP0c02: adding io range 0x50-0x52, size=3D0x3, align=3D0x1
PNP0c02: adding io range 0x72-0x77, size=3D0x6, align=3D0x1
PNP0c02: adding io range 0x91-0x93, size=3D0x3, align=3D0x1
PNP0c02: adding io range 0xa2-0xbe, size=3D0x1d, align=3D0x1
PNP0c02: adding io range 0x400-0x43f, size=3D0x40, align=3D0x1
PNP0c02: adding io range 0x440-0x44f, size=3D0x10, align=3D0x1
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: end config
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x290-0x297, size=3D0x8, align=3D0x1
PNP0c02: adding io range 0x370-0x371, size=3D0x2, align=3D0x1
PNP0c02: end config
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0x8
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 11 device ID PNP0501 (0105d041)
PNP0c02: end config
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0400: adding io range 0x378-0x37f, size=3D0x8, align=3D0x8
PNP0400: adding io range 0-0xffffffff, size=3D0, align=3D0x8
PNP0400: adding irq mask 0x80
PNP0400: adding dma mask 00
PNP0400: end config
pnpbios: handle 13 device ID PNP0400 (0004d041)
PNP0700: adding io range 0x3f0-0x3f5, size=3D0x6, align=3D0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 14 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 15 device ID PNP0f13 (130fd041)
PNP0a03: end config
pnpbios: handle 16 device ID PNP0a03 (030ad041)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 =
bf 1f 00 4f 0d 0e 00 00 05 50 9c 8e 8f 28 1f 96 =
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x1 on isa0
sio0: type 16550A
ppc0: parallel port found at 0x378
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
nTppb1284: error=3D3 status=3D0xd8 event=3D24
1Tppbus0: IEEE1284 device found n1/NIBBLETn2ppb1284: error=3D1 status=3D0=
xe8 event=3D7
TnTppb1284: error=3D3 status=3D0xd8 event=3D24
8ppb1284: error=3D1 status=3D0xe8 event=3D7
TnTppb1284: error=3D3 status=3D0xd8 event=3D24
8ppb1284: error=3D1 status=3D0xe8 event=3D7
TnTppb1284: error=3D3 status=3D0xd8 event=3D24
4ppb1284: error=3D1 status=3D0xe8 event=3D7
TnTppb1284: error=3D3 status=3D0xd8 event=3D24
1/NIBBLE_IDTn2ppb1284: error=3D1 status=3D0xe8 event=3D7
TnTppb1284: error=3D3 status=3D0xd8 event=3D24
8ppb1284: error=3D1 status=3D0xe8 event=3D7
TnTppb1284: error=3D3 status=3D0xd8 event=3D24
8ppb1284: error=3D1 status=3D0xe8 event=3D7
TnTppb1284: error=3D3 status=3D0xd8 event=3D24
0T/Extensibility LinkTppb1284: error=3D3 status=3D0xd8 event=3D24
Probing for PnP devices on ppbus0:
nTppb1284: error=3D3 status=3D0xd8 event=3D24
1BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB=
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBTppb: <PnP> 102 characters: (0x0) f(0x66) M=
(0x4d) F(0x46) G(0x47) :(0x3a) C(0x43) a(0x61) n(0x6e) o(0x6f) n(0x6e) ;(=
0x3b) C(0x43) M(0x4d) D(0x44) :(0x3a) B(0x42) J(0x4a) ,(0x2c) L(0x4c) Q(0=
x51) ,(0x2c) B(0x42) J(0x4a) L(0x4c) ,(0x2c) B(0x42) J(0x4a) R(0x52) a(0x=
61) s(0x73) t(0x74) e(0x65) r(0x72) ,(0x2c) B(0x42) S(0x53) C(0x43) C(0x4=
3) ;(0x3b) M(0x4d) D(0x44) L(0x4c) :(0x3a) B(0x42) J(0x4a) C(0x43) -(0x2d=
) 2(0x32) 6(0x36) 5(0x35) S(0x53) P(0x50) ;(0x3b) C(0x43) L(0x4c) S(0x53)=
:(0x3a) P(0x50) R(0x52) I(0x49) N(0x4e) T(0x54) E(0x45) R(0x52) ;(0x3b) =
D(0x44) E(0x45) S(0x53) :(0x3a) C(0x43) a(0x61) n(0x6e) o(0x6f) n(0x6e) =
(0x20) B(0x42) J(0x4a) C(0x43) -(0x2d) 2(0x32) 6(0x36) 5(0x35) S(0x53) P(=
0x50) ;(0x3b) V(0x56) E(0x45) R(0x52) :(0x3a) 1(0x31) .(0x2e) 0(0x30) 0(0=
x30) ;(0x3b) S(0x53) T(0x54) A(0x41) :(0x3a) 1(0x31) 0(0x30) ;(0x3b) =
ppbus0: <Canon BJC-265SP/1.00> PRINTER BJ,LQ,BJL,BJRaster,BSCC
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
unknown0: <PNP0c01> at iomem 0-0x9fbff,0x9fc00-0x9ffff,0xe0000-0xfffff,0x=
3fe0000-0x3ff7fff,0x3ff8000-0x3ffffff,0xfec00000-0xfec00fff,0xfee00000-0x=
fee00fff,0xfff80000-0xffffffff on isa0
unknown1: <PNP0c01> at iomem 0x100000-0x3fdffff on isa0
unknown: <PNP0000> can't assign resources
unknown2: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on =
isa0
unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown5: <PNP0800> at port 0x61 on isa0
unknown6: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown: <PNP0c02> can't assign resources
unknown7: <PNP0c02> at port 0x290-0x297,0x370-0x371 on isa0
unknown: <PNP0501> can't assign resources
unknown8: <PNP0c02> on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown9: <PNP0a03> on isa0
BIOS Geometries:
0:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 heads, 1..63=3D63 sect=
ors
1:030c7f3f 0..780=3D781 cylinders, 0..127=3D128 heads, 1..63=3D63 sector=
s
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 4008c440, tty 40031292, net 40071292
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
ata0-master: success setting up UDMA2 mode on PIIX4 chip
ad0: <QUANTUM FIREBALL CR8.4A/A5U.1200> ATA-4 disk at ata0 as master
ad0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=3D4 dmamode=3D2 udmamode=3D2 cblid=3D0
Creating DISK ad0
Creating DISK wd0
ata0-slave: success setting up UDMA2 mode on PIIX4 chip
ad1: <QUANTUM FIREBALL ST3.2A/A0F.0800> ATA-3 disk at ata0 as slave
ad1: 3079MB (6306048 sectors), 6256 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=3D4 dmamode=3D2 udmamode=3D2 cblid=3D0
Creating DISK ad1
Creating DISK wd1
ata1-master: piomode=3D4 dmamode=3D2 udmamode=3D-1 dmaflag=3D1
ata1-master: success setting up WDMA2 mode on PIIX4 chip
acd0: <Hewlett-Packard CD-Writer Plus 8200/1.0f> CD-RW drive at ata1 as m=
aster
acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, WD=
MA2
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ata1-slave: piomode=3D3 dmamode=3D1 udmamode=3D-1 dmaflag=3D1
ata1-slave: success setting up PIO3 mode on generic chip
acd1: <CD-524E/3.0C> CDROM drive at ata1 as slave
acd1: read 4134KB/s (4134KB/s), 128KB buffer, PIO3
acd1: Reads: CD-DA stream
acd1: Audio: play, 16 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end =3D 12578894, size 12578832 : OK
ad0s2: type 0xe, start 12578895, end =3D 16498754, size 3919860 : OK
start_init: trying /sbin/init
WARNING: run /dev/MAKEDEV before 2000-06-01 to get rid of block devices
Linux-ELF exec handler installed
splash: image decoder found: logo_saver
ad1s1: type 0x7, start 63, end =3D 6306047, size 6305985 : OK
--------------C9DFBD0703A50F0613FAF78E--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39118B26.373911D3>