Date: Tue, 6 Mar 2007 14:06:18 +0300 From: "Artem Kuchin" <matrix@itlegion.ru> To: <stable@freebsd.org> Subject: Is SATA II supported in 6.2-stable? Message-ID: <00e001c75fe2$0f3f4200$0c00a8c0@Artem> References: <20070227205351.GA72597@ravenloft.kiev.ua> <20070305035945.GA71660@xor.obsecurity.org> <20070305132350.GB57253@comp.chem.msu.su> <200703051314.29902@aldan> <20070305191714.GF57253@comp.chem.msu.su> <20070305193022.GM10453@deviant.kiev.zoral.com.ua> <000b01c75f6b$594c23d0$0c00a8c0@Artem> <2a41acea0703051355n5148d19cp36bc425ecd054add@mail.gmail.com><008201c75fcc$21302940$0c00a8c0@Artem> <45ED35F2.9080505@tomjudge.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi! I just setup a new machine and while it is supposed to be full SATA II i still see these lines in at kernel init: Mar 6 14:00:09 aaa kernel: ad8: 305245MB <Seagate ST3320620AS 3.AAE> at ata4-master SATA150 Mar 6 14:00:09 aaa kernel: ad10: 305245MB <Seagate ST3320620AS 3.AAE> at ata5-master SATA150 As you see, it says SATA150 , while the drives are SATA II (which is, as i understand, SATA 300). Both drives are connected to RAID controller and form a mirror raid: Mar 6 14:00:09 aaa kernel: ar0: 305108MB <LSILogic v3 MegaRAID RAID1> status: READY Mar 6 14:00:09 aaa kernel: ar0: disk0 READY (master) using ad8 at ata4-master Mar 6 14:00:09 aaa kernel: ar0: disk1 READY (mirror) using ad10 at ata5-master Any idea how to make it work as SATA II? -- Regards, Artem
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00e001c75fe2$0f3f4200$0c00a8c0>