Date: Sat, 5 Mar 2005 13:36:33 -0800 (PST) From: David Moler <dbmoler@yahoo.com> To: Arne "Wörner" <arne_woerner@yahoo.com>, freebsd-multimedia@freebsd.org Subject: Re: amd64 / bktr Message-ID: <20050305213633.32608.qmail@web51109.mail.yahoo.com> In-Reply-To: 6667
next in thread | raw e-mail | index | archive | help
I tried removing this section and recompiling the kernel: if (card == CARD_MIRO && mt2032_init(bktr) == 0) { bktr->card = cards[ (card = CARD_PINNACLE_PCTV_RAVE) ]; select_tuner( bktr, TUNER_MT2032 ); goto checkDBX; } I also tried setting hw.bt848.tuner=1. I get the same result. Perhaps this is a problem with mplayer? --- Arne Wörner <arne_woerner@yahoo.com> wrote: > --- David Moler <dbmoler@yahoo.com> wrote: > > %dmesg |grep bktr > > bktr0: <BrookTree 878> mem 0xfa002000-0xfa002fff > irq > > 18 at device 12.0 on pci0 > > bktr0: Warning - card vendor 0x1002 (model 0x0001) > > unknown. > > bktr0: MT2032: Companycode=3c3c Part=3c > Revision=3c > > bktr0: MT2032 not found or unknown type > > bktr0: Detected a MSP3430G-A4 at 0x80 > > bktr0: Pinnacle/Miro TV, Temic NTSC tuner, > msp3400c > > stereo. > > > > These lines are in the kernel: > > device bktr > > device iicbus > > device iicbb > > device smbus > > > Looks ok... > > Maybe the changes about MicroTune MT2032 tuners > ruined the support > for your card. > > Could you try to set the tuner in /boot/loader.conf > manually? > hw.bt848.tuner=1 > or so? > > If that does not help, you could try to remove the > mt2032 stuff > from /sys/dev/bktr/bktr_card.c and recompile your > kernel. > > Since I asked for the changes for my Pinnacle PCTV > Rave card after > R5.3, I am quite interested in solving the problems > I might have > caused... :-) > > -Arne > > > > > > __________________________________ > Celebrate Yahoo!'s 10th Birthday! > Yahoo! Netrospective: 100 Moments of the Web > http://birthday.yahoo.com/netrospective/ >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050305213633.32608.qmail>