Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 Oct 1998 23:28:07 -0500 (EST)
From:      Mike Andrews <mandrews@termfrost.org>
To:        freebsd-hardware@FreeBSD.ORG
Subject:   Sony SDT-5000 hardware compression?
Message-ID:  <Pine.BSF.4.05.9810272322520.20447-100000@mindcrime.termfrost.org>

next in thread | raw e-mail | index | archive | help
I'm having problems making hardware compression work on a Sony SDT-5000
tape drive, which is supposed to be a DDS-2 drive.  90 meter tapes are
filling up at the 2 gig mark -- I should be able to get at least 3 or so
per tape, since the data I'm backing up is pretty compressible.  I've
tried the obvious:

tarkus# uname -a
FreeBSD tarkus.dcr.net 2.2.7-STABLE FreeBSD 2.2.7-STABLE #0: Tue Oct 13 07:52:09 EDT 1998     mandrews@dusty.dcr.net:/usr/src/sys/compile/TARKUS  i386
tarkus# dmesg | grep ncr0:3:0
(ncr0:3:0): "SONY SDT-5000 3.30" type 1 removable SCSI 2
st0(ncr0:3:0): Sequential-Access
st0(ncr0:3:0): 5.0 MB/s (200 ns, offset 8)
tarkus# mt status
Present Mode:   Density = X3B5/88-185A Blocksize variable Comp 0
---------available modes---------
Mode 0:         Density = 0x00         Blocksize variable
Mode 1:         Density = X3.136-1986  Blocksize = 512 bytes
Mode 2:         Density = X3.39-1986   Blocksize variable
Mode 3:         Density = X3.54-1986   Blocksize variable
tarkus# mt comp 1
mt: /dev/nrst0: comp: Invalid argument
tarkus# mt density 0x8c
mt: /dev/nrst0: density: Invalid argument

(the latter is the density code on an Exabyte 8500C, supposedly... it was
kind a shot in the dark)

I'm beginning to wonder if this version of the drive doesn't have
compression -- it's labeled SDT-5010 on the case, but comes up as a
SDT-5000 when the system boots. There is a jumper on the back that is
labeled "DC Disable" on Sony's spec sheet, and I've tried it in both the
Enable and Disable position.  (DC Disable Disable is a confusing double
negative, so I'm not 100% sure which way it's supposed to go. :)

This has to be something simple; this kind of thing doesn't usually stump
me, and I'll probably be embarassed when someone points it out...

Thanks!


Mike Andrews (MA12) icq 6602506  --------------  mandrews@termfrost.org
VP 'n' Systems/Network Administrator  ---------------  mandrews@dcr.net
Digital Crescent, Frankfort, KY  -----------  http://www.termfrost.org/
# view;touch;unzip;finger;mount;mv;mv;mv;yes;mv;yes;mv;yes;umount;sleep


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9810272322520.20447-100000>