Date: Wed, 19 Jun 1996 09:38:23 +1000 (EST) From: Carey Nairn <cp_nairn@cc.utas.edu.au> To: Haytham Algyndy <haytham@s4.elec.uq.edu.au> Cc: questions@freebsd.com, jkh@freebsd.org Subject: Re: IDE CDROM configuration Message-ID: <Pine.SOL.3.91.960619093402.13138A-100000@wedge.its.utas.edu.au> In-Reply-To: <199606181524.BAA17467@s4.elec.uq.edu.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Your kernel options look OK (the same as mine) so I think we can rule that out. I have the CDROM in my machine as the slave device on my first IDE controller because I couldn't get it to work as the master on the second controller. I do remember having to make the wcd0c device again before it would work for me though. i.e. cd /dev sh MAKEDEV wcd0 after that it all worked. cheers, Carey On Wed, 19 Jun 1996, Haytham Algyndy wrote: > Hi > > I'm a bit confused about configuring the CDROM. > The CDROM that I'm using is a Creative-Labs CD, > (It is detected by win95 as a Goldstar GCD-R542B) > Quad speed and is connected alone to the secondary IDE > port. The following lines are added to my kernel. > > options ATAPI > options "CD9660" > controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr > device wcd0 > > The machine is a 486 DX2 clone, with a 1.7GB IBM disk, NE2000 compatible card. > Now > > In the handbook, the wcd0 is referred to as controller rather than > device. > > I've tried compiling my kernel for each (controller & device) and I get > /dev/wcd0c device not configured > > message whenever I try to mount my CD in each situation. > > Any help appreciated > Thank you > haytham > -- > ________________________________________________________________________ > Haytham Abd-Alsalam Algyndy > Dept. of Elec. and Comp. Eng. > The UNIVERSITY of QUEENSLAND > Brisbane 4072, Queensland > Australia > haytham@elec.uq.edu.au > tel. 61 - 07 - 365 356 4 (AW) > Fax. 61 - 07 - 365 499 9 > ________________________________________________________________________ > ========================================================================= Carey Nairn ! email : Carey.Nairn@its.utas.edu.au Networks and Communications ! phone : (002) 20 7419 Information Technology Services ! fax : (002) 20 7898 University of Tasmania. ! =========================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SOL.3.91.960619093402.13138A-100000>