Date: Fri, 17 Mar 2000 19:49:49 -0500 From: Cy Ardoin <ardoin@mindspring.com> To: "Matthew N. Dodd" <winter@jurai.net> Cc: Soren Schmidt <sos@freebsd.dk>, freebsd-bugs@FreeBSD.ORG Subject: Re: HPT 366 on ABIT BE6 Message-ID: <38D2D2AD.D00EC58A@mindspring.com> References: <Pine.BSF.4.21.0003171940110.50194-100000@sasami.jurai.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------315826E6BB5C0E3D9DDD1872
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Yep, it was the AHA-2920 on irq 11. I just removed it and
there is no change in the behavior. When I access the HPT
drive it locks up on command timeout, resetting drives...
Yell if there is any additional debugging I can help with in the code.
I have no problem mucking kernel code, i've done it for years.
Thanks
Cy
I attached the "verbose" boot info with the rogue SCSI card removed.
"Matthew N. Dodd" wrote:
> On Fri, 17 Mar 2000, Soren Schmidt wrote:
> > > pci0: <unknown card> (vendor=0x1036, dev=0x0000) at 11.0 irq 11
> >
> > I dont like this, what is this ?
>
> (Vendor)
> { 0x1036, "FDomain", "Future Domain" } ,
> (Vendor/Device Id)
> { 0x1036, 0x0000, "TMC-18C30", "" } ,
>
> --
> | Matthew N. Dodd | '78 Datsun 280Z | '75 Volvo 164E | FreeBSD/NetBSD |
> | winter@jurai.net | 2 x '84 Volvo 245DL | ix86,sparc,pmax |
> | http://www.jurai.net/~winter | This Space For Rent | ISO8802.5 4ever |
--------------315826E6BB5C0E3D9DDD1872
Content-Type: text/plain; charset=us-ascii;
name="verbose2.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="verbose2.txt"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #1: Wed Mar 15 14:31:08 EST 2000
root@blackwater.mindspring.com:/usr/src/sys/compile/CY
Calibrating clock(s) ... TSC clock: 501169629 Hz, i8254 clock: 1193261 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003d7000 - 0x07ff7fff, 130158592 bytes (31777 pages)
avail memory = 126259200 (123300K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00faf90
bios32: Entry = 0xfb410 (c00fb410) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb440
pnpbios: Found PnP BIOS data at 0xc00fc010
pnpbios: Entry = f0000:c038 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc03be000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e8000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=10
map[20]: type 1, range 32, base 0000d000, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x8086, dev=0x1229, revid=0x01
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base f0100000, size 12
map[14]: type 1, range 32, base 0000d400, size 5
map[18]: type 1, range 32, base f0000000, size 20
found-> vendor=0x1103, dev=0x0004, revid=0x01
class=01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000d800, size 3
map[14]: type 1, range 32, base 0000dc00, size 2
map[20]: type 1, range 32, base 0000e000, size 8
found-> vendor=0x1103, dev=0x0004, revid=0x01
class=01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 0000e400, size 3
map[14]: type 1, range 32, base 0000e800, size 2
map[20]: type 1, range 32, base 0000ec00, size 8
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x0101, revid=0x10
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base ec000000, size 24
map[14]: type 1, range 32, base e0000000, size 27
pci1: <PCI bus> on pcib1
pci1: <NVidia GeForce DDR graphics accelerator> (vendor=0x10de, dev=0x0101) at 0.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=01 status0=00 status1=ff
ata1: mask=01 status0=00 status1=ff
ata1: devices = 0x4
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 10
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xd400-0xd41f mem 0xf0000000-0xf00fffff,0xf0100000-0xf0100fff irq 10 at device 9.0 on pci0
fxp0: Ethernet address 00:a0:c9:32:3c:4f
fxp0: supplying EUI64: 00:a0:c9:ff:fe:32:3c:4f
bpf: fxp0 attached
atapci1: <HighPoint HPT366 ATA66 controller> port 0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.0 on pci0
ata2: iobase=0xd800 altiobase=0xdc00 bmaddr=0xe000
ata2: mask=03 status0=50 status1=01
ata2: mask=03 status0=50 status1=01
ata2: devices = 0x3
ata2: at 0xd800 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0xec00-0xecff,0xe800-0xe803,0xe400-0xe407 irq 11 at device 19.1 on pci0
devclass_alloc_unit: ata2 already exists, using next available unit number
ata3: iobase=0xe400 altiobase=0xe800 bmaddr=0xec00
ata3: mask=03 status0=50 status1=01
ata3: mask=03 status0=50 status1=01
ata3: devices = 0x3
ata3: at 0xe400 on atapci2
using shared irq11.
Trying Read_Port at 203
Trying Read_Port at 243
CTL0031: start dependant
CTL0031: adding irq mask 0x20
CTL0031: adding dma mask 0x2
CTL0031: adding dma mask 0x20
CTL0031: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0031: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: start dependant
CTL0031: adding irq mask 0xca0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: end dependant
PNPffff: adding io range 0x100-0x3f8, size=0x1, align=0x8
CTL0021: start dependant
CTL0021: adding io range 0x620-0x623, size=0x4, align=0x1
CTL0021: start dependant
CTL0021: adding io range 0x620-0x683, size=0x4, align=0x20
CTL0021: end dependant
CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1
CTL0051: adding io range 0x100-0x3f8, size=0x1, align=0x8
USR1001: adding irq mask 0x2b8
USR1001: start dependant
USR1001: adding io range 0x110-0x117, size=0x8, align=0x1
USR1001: start dependant
USR1001: adding io range 0x170-0x177, size=0x8, align=0x1
USR1001: start dependant
USR1001: adding io range 0x210-0x217, size=0x8, align=0x1
USR1001: start dependant
USR1001: adding io range 0x270-0x277, size=0x8, align=0x1
USR1001: start dependant
USR1001: adding io range 0x2f0-0x2f7, size=0x8, align=0x1
USR1001: start dependant
USR1001: adding io range 0x370-0x377, size=0x8, align=0x1
USR1001: end dependant
devclass_alloc_unit: ata0 already exists, using next available unit number
devclass_alloc_unit: ata1 already exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: status 10 00 64
psm: data 08 00 00
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic1: not probed (disabled)
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5P> HP ENHANCED PCL5,PJL
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
isa_probe_children: probing PnP devices
unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
unknown1: <Reserved> at port 0x100 on isa0
unknown2: <WaveTable> at port 0x620-0x623 on isa0
unknown3: <Game> at port 0x200-0x207 on isa0
unknown4: <StereoEnhance> at port 0x108 on isa0
unknown5: <U.S. Robotics Inc., Sportster Winmodem 28.8> at port 0x110-0x117 irq 9 on isa0
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 4008c840, tty 4003109a, net 4007149a
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
ata2-slave: identify retries exceeded
ata3-slave: identify retries exceeded
ata0-master: success setting up UDMA2 mode on PIIX4 chip
ad0: <Maxtor 91366U4/RA530JN0> ATA-5 disk at ata0 as master
ad0: 13029MB (26684784 sectors), 26473 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad0
Creating DISK wd0
ata2-master: success setting up UDMA4 mode on HPT366 chip
ad4: <WDC WD153BA/16.13M16> ATA-4 disk at ata2 as master
ad4: 14669MB (30043440 sectors), 29805 cyls, 16 heads, 63 S/T, 512 B/S
ad4: 16 secs/int, 1 depth queue, UDMA66
ad4: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad4
Creating DISK wd4
ata3-master: success setting up UDMA4 mode on HPT366 chip
ad6: <WDC WD136AA/80.10A80> ATA-4 disk at ata3 as master
ad6: 12971MB (26564832 sectors), 26354 cyls, 16 heads, 63 S/T, 512 B/S
ad6: 16 secs/int, 1 depth queue, UDMA66
ad6: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad6
Creating DISK wd6
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting up WDMA2 mode on PIIX4 chip
acd0: <KENWOOD CD-ROM UCR-412 V124K/1.00> CDROM drive at ata1 as master
acd0: read 7812KB/s (7812KB/s), 512KB buffer, WDMA2
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data/audio disc loaded, unlocked
Mounting root from ufs:/dev/ad0s3a
ad0s1: type 0xb, start 63, end = 4000184, size 4000122 : OK
ad0s2: type 0x5, start 4000185, end = 12402179, size 8401995 : OK
ad0s3: type 0xa5, start 12402180, end = 26683964, size 14281785 : OK
ad0s5: type 0xb, start 4000248, end = 12402179, size 8401932 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
fxp0: starting DAD for fe80:0001::02a0:c9ff:fe32:3c4f
fxp0: DAD complete for fe80:0001::02a0:c9ff:fe32:3c4f - no duplicates found
--------------315826E6BB5C0E3D9DDD1872--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38D2D2AD.D00EC58A>