Date: Thu, 4 Jul 1996 18:47:00 +0000 (GMT) From: Gabor Zahemszky <zgabor@CoDe.hu> To: freebsd-questions@freebsd.org Cc: gio@intelnet.vol.it Subject: Re: HELP requested on iij-ppp Message-ID: <199607041847.SAA00331@CoDe.CoDe.hu> In-Reply-To: <Pine.BSF.3.91.960703103335.2092B-100000@arneis.intelnet.vol.it> from "Giorgio Cico" at Jul 4, 96 12:36:19 pm
next in thread | previous in thread | raw e-mail | index | archive | help
> > HELP !!! > > I need to configure a FBSD box as an access server, connecting two modem > to the two Com ports. > I followed the manual in the section 'Receiving incoming ppp connections' > but it doesn't works well. If I understand well, you configured your winsock to use CSLIP (compressed slip) not, ppp. (Or both of them, and they are kick each other.) Look at it: > Trumpet Winsock Version 2.0 Revision B > Copyright (c) 1993,1994 by Peter R. Tattam > All Rights Reserved. > THIS IS AN UNREGISTERED SHAREWARE VERSION FOR EVALUATION ONLY. > PPP[C021] state = starting > PPP[C023] state = starting > PPP[8021] state = starting > PPP ENABLED > Internal SLIP driver COM1 Baud rate = 38400 Hardware handshaking Compression enabled ------------^ ----------------------------------------------------------------------^ > IP buffers = 32 > My IP = 0.0.0.0 netmask = 0.0.0.0 gateway = 0.0.0.0 > Manually dialing. > AFTER LOGGING IN, TYPE THE <ESC> KEY TO RETURN TO NORMAL SLIP PROCESSING. > PPP DISABLED > atdt803480667 > CONNECT 26400/ARQ I don't know ppp/slip very well, so maybe it's not the problem. -- Gabor Zahemszky <zgabor@CoDe.hu> -:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:- Earth is the cradle of human sense, but you can't stay in the cradle forever. Tsiolkovsky
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199607041847.SAA00331>