Date: Fri, 5 Jun 1998 02:33:29 -0700 From: Dmitry Kohmanyuk =?KOI8-R?B?5M3J1NLJyiDrz8jNwc7Ayw==?= <dk@farm.org> To: freebsd-hackers@FreeBSD.ORG Subject: /kernel: changing root device to st0s1a Message-ID: <19980605023329.13460@dog.farm.org>
next in thread | raw e-mail | index | archive | help
no, it's not a joke. It's genuine 2.2.6-R dmesg output.
no, this machine doesn't run from a tape, it doesn't ever have it ;_)
before I dig into sources, have anybody seen this before???
this machine was also unable to boot after installing 2.2.6-R on it
(both fdisk mode and dedicated mode - as usual, booting from floppy
and then saying sd(0,a)/kernel works). I have had to fire Norton
Disk Editor from DOS and fix wrong geometry in Partition Table.
full dmesg:
# dmesg
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.6-RELEASE #0: Wed Mar 25 02:28:49 GMT 1998
jkh@time.cdrom.com:/usr/src/sys/compile/GENERIC
CPU: Pentium (90.00-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 63135744 (61656K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1
vga0 <VGA-compatible display device> rev 83 int a irq 15 on pci0:18:0
bt0 <Buslogic 946 SCSI host adapter> rev 0 int a irq 5 on pci0:19:0
bt0: Bt946C/ 0-(32bit) bus
bt0: reading board settings, busmastering, int=11
bt0: version 4.25J, fast sync, parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15
bt0: Using Strict Round robin scheme
bt0 waiting for scsi devices to settle
(bt0:0:0): "SEAGATE ST32155N 0318" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 2049MB (4197405 512 byte sectors)
vx0 <3COM 3C905 Fast Etherlink XL PCI> rev 0 int a irq 11 on pci0:20:0
mii[*mii*] address 00:60:97:07:9e:e0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
bt: unit number (1) too high
bt1 not found at 0x330
ep0 not found at 0x300
ex0 not found at 0xffffffff
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
changing root device to st0s1a
Intel Pentium F00F detected, installing workaround
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980605023329.13460>