Date: Fri, 1 Dec 2000 13:02:28 -0000 From: "Andy Chantrill" <andy@chantrill.freeserve.co.uk> To: "robi" <rnunnari@libero.it> Cc: <isdn@freebsd.org> Subject: Re: One more thing ... Message-ID: <007f01c05b96$f66c7960$01010a0a@DEDICATIONINET.local> References: <G4VQN7$Ioeb0iWC76SABs1ex6uUImMm57WxmWCaDHQ4ZD2yjbw@libero.it>
next in thread | previous in thread | raw e-mail | index | archive | help
Yep ... here it is; -- #====================================================== # SYSTEM section: isdnd global configuration parameters #====================================================== system acctall = on acctfile = /var/log/isdnd.acct useacctfile = yes monitor-allowed = off #====================================================== # Entry section: PPP to Freeserve #====================================================== entry name = rbch0 isdncontroller = 0 isdnchannel = -1 local-phone-dialout = 855078 usrdevicename = rbch usrdeviceunit = 0 local-phone-incoming = * remote-phone-dialout = * remote-phone-incoming = * remdial-handling = first b1protocol = hdlc dialin-reaction = ignore dialout-type = normal dialretries = 1 recoverytime = 1 idletime-outgoing = 0 idletime-incoming = 0 unitlengthsrc = rate unitlength = 90 ratetype = 0 entry name = rbch1 isdncontroller = 0 isdnchannel = -1 local-phone-dialout = 855078 usrdevicename = rbch usrdeviceunit = 0 local-phone-incoming = * remote-phone-dialout = * remote-phone-incoming = * remdial-handling = first b1protocol = hdlc dialin-reaction = ignore dialout-type = normal dialretries = 1 recoverytime = 1 idletime-outgoing = 0 idletime-incoming = 0 unitlengthsrc = rate unitlength = 90 ratetype = 0 # EOF ################################################# -- Andy. ----- Original Message ----- From: "robi" <rnunnari@libero.it> To: <andy@chantrill.freeserve.co.uk> Cc: <isdn@freebsd.org> Sent: Friday, December 01, 2000 8:09 AM Subject: Re: One more thing ... Have you got two 'Entry' configuration sections in your isdnd.rc with correct usrdeviceunit and name? ...and yes. You can configure it two have both channel open permanently by using (can't remember the keyword now) instead of 'auto'. Hope this helps. Robi. > Hey, > > I got my ISDN t/a working ... but I have one last question - I'm trying to > bind my ISDN channels in order to connect at 128k. I'm using the following > block in ppp.conf in order to try and do this: > > -- > set mrru 1500 > clone 1,2 > link deflink rm > link * set mode auto > set autoload 5 10 30 > -- > > (I just used these low figures for testing purposes). > > However ... the logs say this; > > -- > Dec 1 04:05:59 dedication ppp[459]: Phase: 10% saturation -> Opening link > ``2'' > Dec 1 04:05:59 dedication ppp[459]: Phase: 2: closed -> opening > Dec 1 04:05:59 dedication ppp[459]: Phase: 2: /dev/i4brbch0 is in use > Dec 1 04:05:59 dedication ppp[459]: Phase: 2: Connected! > Dec 1 04:05:59 dedication ppp[459]: Phase: 2: opening -> dial > Dec 1 04:05:59 dedication ppp[459]: Phase: 2: dial -> carrier > Dec 1 04:06:20 dedication ppp[459]: Phase: 2: /dev/i4brbch1: No carrier > (increase ``set cd'' from 20 ?) > Dec 1 04:06:20 dedication ppp[459]: Phase: 2: Disconnected! > Dec 1 04:06:20 dedication ppp[459]: Phase: 2: carrier -> hangup > Dec 1 04:06:20 dedication ppp[459]: Phase: 2: Connect time: 21 secs: 0 > octets in, 0 octets out > Dec 1 04:06:20 dedication ppp[459]: Phase: 2: : 0 packets in, 0 packets out > Dec 1 04:06:20 dedication ppp[459]: Phase: total 0 bytes/sec, peak 0 > bytes/sec on Fri Dec 1 04:06:20 2000 > Dec 1 04:06:20 dedication ppp[459]: Phase: 2: hangup -> closed > -- > > It's not letting me connect. I tried increasing the cd setting to 20 - still > just hangs and then closes the connection. What am I doing wrong? :) > > Also, is it possible to just leave both channels open permanently? > > > Thanks, Andy. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isdn" in the body of the message > -- Roberto Nunnari Luck is... miss the wrong train. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?007f01c05b96$f66c7960$01010a0a>