Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 30 Mar 2004 09:25:45 -0800
From:      Andrew Marks <spam@amrx.net>
To:        freebsd-mobile@freebsd.org
Subject:   Re: The Best Laptop
Message-ID:  <20040330172545.GA21606@mail.san.rr.com>
In-Reply-To: <20040329211056.E68476@fez.hyperreal.org>
References:  <40686157.3020902@cs.uiowa.edu> <4068F730.3020400@pacific.net.sg> <20040329211056.E68476@fez.hyperreal.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 29, 2004 at 09:17:01PM -0800, Brian Behlendorf wrote:
> 
> I've got this too, under 5-CURRENT, but I can't get atapicam to work; if I
> compile it in the kernel then it won't boot if the CD-RW is attached.
> Without it in the kernel, I can't burn CDs (unless there's some tool that
> supports IDE CD burning?).  Any idea?
> 
> They've gotten suspend/resume working under Linux: check out
> 
> http://mrohne.home.cern.ch/mrohne/P2120/P2120_Linux_S3.html
> 
> but it sounds like a Mighty Hack.
> 
> 	Brian
> 
> On Tue, 30 Mar 2004, Erich Dollansky wrote:
> > I have an Fujitsu P2120. FreeBSD 5.2 works but has problems with the
> > power settings. With other words, NT has a longer operating time than
> > FreeBSD on it.
> >
> > All other features of the machines did not make any problems.
> >
> > Erich
> >

I also have a P2120 running CURRENT.  I noticed that atapicam developed
some problems but have been doing alright without out it.  I have also
been getting along with out my USB 2.0 ports, or pretty much any USB
ports, save the one for the floppy drive which seems to work.  I was
wondering if either of you have USB support on your P2120s, and what
you may have done differently than me.  Also, there is a power
management device that also has no support.


dmesg
-------------------------------
ohci1: <NEC uPD 9210 USB controller> at device 9.0 on pci0
ohci1: Could not map memory
device_probe_and_attach: ohci1 attach returned 6
ohci1: <NEC uPD 9210 USB controller> at device 9.1 on pci0
ohci1: Could not map memory
device_probe_and_attach: ohci1 attach returned 6

pciconf -vl:
-------------------------------------------------
none3@pci0:9:0:	class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD9210/72010xx USB Open Host Controller'
    class    = serial bus
    subclass = USB
none4@pci0:9:1:	class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD9210/72010xx USB Open Host Controller'
    class    = serial bus
    subclass = USB
none5@pci0:9:2:	class=0x0c0320 card=0x11a310cf chip=0x00e01033 rev=0x02 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040330172545.GA21606>