Date: Wed, 06 Sep 2000 17:54:18 -0500 From: Stephen Hocking <shocking@houston.rr.com> To: Doug Rabson <dfr@nlsystems.com> Cc: Stephen Hocking <shocking@houston.rr.com>, multimedia@FreeBSD.ORG, current@FreeBSD.ORG, dfr@FreeBSD.ORG Subject: Re: Strange problems with AGP driver & sound. Message-ID: <200009062254.e86MsIG00366@bloop.craftncomp.com> In-Reply-To: Message from Doug Rabson <dfr@nlsystems.com> of "Wed, 06 Sep 2000 21:08:17 BST." <Pine.BSF.4.21.0009062107230.530-100000@salmon.nlsystems.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multipart MIME message.
--==_Exmh_19822812510
Content-Type: text/plain; charset=us-ascii
Ok, here's the two dmesg listing from verbose boots, one with the agp code as
a module, and the other built in.
Stephen
--==_Exmh_19822812510
Content-Type: text/plain ; name="agp.as.module"; charset=us-ascii
Content-Description: agp.as.module
Content-Disposition: attachment; filename="agp.as.module"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Sep 6 17:42:22 CDT 2000
toor@bloop.craftncomp.com:/usr/src/sys/compile/bloop
Calibrating clock(s) ... TSC clock: 501156139 Hz, i8254 clock: 1193229 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 501138511 Hz
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 128M bytes
Write Allocate 15-16M bytes: Disable
real memory = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003a3000 - 0x07fe5fff, 130297856 bytes (31811 pages)
avail memory = 127025152 (124048K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb020
bios32: Entry = 0xfb4a0 (c00fb4a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4d0
pnpbios: Found PnP BIOS data at 0xc00fc0a0
pnpbios: Entry = f0000:c0c8 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel.ko" at 0xc038a000.
Preloaded elf module "mga.ko" at 0xc038a0ac.
Preloaded elf module "agp.ko" at 0xc038a148.
Preloaded elf module "drm.ko" at 0xc038a1e4.
nulldev: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
K6-family MTRR support enabled (2 registers)
VESA: information block
56 45 53 41 00 02 ca 6c 00 c0 01 00 00 00 74 69
00 c0 00 02 05 01 df 6c 00 c0 e6 6c 00 c0 f2 6c
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 11 mode(s) found
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc00c6974 (c0006974)
VESA: Matrox Graphics Inc.
VESA: Matrox Matrox G400 00
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 84090144 bytes/sec
bzero() bandwidth = 119488588 bytes/sec
pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> on motherboard
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0598, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1106, dev=0x0586, revid=0x47
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 4, range 32, base 00006400, size 4, enabled
found-> vendor=0x1106, dev=0x3040, revid=0x10
bus=0, slot=7, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x11ad, dev=0x0002, revid=0x20
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 4, range 32, base 00006c00, size 8, enabled
map[14]: type 1, range 32, base eb000000, size 8, enabled
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP/82C694X (Apollo MVP3/Pro133A) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: physical bus=1
found-> vendor=0x102b, dev=0x0525, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 3, range 32, base e8000000, size 25, enabled
map[14]: type 1, range 32, base e4000000, size 14, enabled
map[18]: type 1, range 32, base e5000000, size 23, enabled
pci1: <PCI bus> on pcib1
drm0: <Matrox MGA G400 AGP graphics accelerator> mem 0xe5000000-0xe57fffff,0xe4000000-0xe4003fff,0xe8000000-0xe9ffffff irq 11 at device 0.0 on pci1
info: [drm] The mga drm module requires the agp module to function correctly
Please load the agp module before you load the mga module
device_probe_and_attach: drm0 attach returned 12
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0x6400-0x640f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x6400
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x6408
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=50 status1=00
ata1: devices = 0x1
ata1: at 0x170 irq 15 on atapci0
dc0: <82c169 PNIC 10/100BaseTX> port 0x6c00-0x6cff mem 0xeb000000-0xeb0000ff irq 10 at device 9.0 on pci0
dc0: Ethernet address: 00:a0:cc:56:31:9a
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x001018, model 0x0021, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
Trying Read_Port at 203
CSC0000: start dependant
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x9
CSC0000: adding irq mask 0x20
CSC0000: adding io range 0x534-0x537, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20
CSC0000: start dependant
CSC0000: adding dma mask 0xa
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0x9aa0
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x26f, size=0x10, align=0x20
CSC0000: start dependant
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0x9aa0
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x3fb, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x30f, size=0x10, align=0x20
CSC0000: end dependant
CSC0001: start dependant
CSC0001: adding io range 0x200-0x207, size=0x8, align=0x8
CSC0001: start dependant
CSC0001: adding io range 0x208-0x20f, size=0x8, align=0x8
CSC0001: end dependant
CSC0010: adding io range 0x120-0xfff, size=0x8, align=0x8
CSC0003: start dependant
CSC0003: adding irq mask 0x200
CSC0003: adding io range 0x330-0x331, size=0x2, align=0x8
CSC0003: start dependant
CSC0003: adding irq mask 0x9a00
CSC0003: adding io range 0x330-0x361, size=0x2, align=0x8
CSC0003: start dependant
CSC0003: adding io range 0x330-0x3e1, size=0x2, align=0x8
CSC0003: end dependant
pnpbios: 16 devices, largest 69 bytes
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: end config
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: end config
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
PNP0800: end config
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: end config
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: end config
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
PNP0c02: end config
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x5000-0x507f, size=0x80, align=0
PNP0a03: adding io range 0x5080-0x50ff, size=0x80, align=0
PNP0a03: end config
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0c02: adding io range 0x208-0x20f, size=0x8, align=0
PNP0c02: end config
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
PNP0700: end config
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: end config
pnpbios: handle 14 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 16 device ID PNP0501 (0105d041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 03 3c
psm: status 90 03 3c
psm: status 90 03 3c
psm: data 08 00 00
psm: status 00 00 28
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
opl0 failed to probe at port 0x388 on isa0
mpu0 failed to probe at port 0x330 irq 9 on isa0
css0 failed to probe at port 0x534 irq 5 drq 1 flags 0x8 on isa0
joy0 failed to probe at port 0x201 on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
pcm0: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0
pcm: setmap 30000, ff00; 0xc7505000 -> 30000
pcm: setmap 40000, ff00; 0xc7515000 -> 40000
unknown: <GAME> failed to probe at port 0x200-0x207 on isa0
unknown: <CTRL> failed to probe at port 0x120-0x127 on isa0
unknown: <MPU> failed to probe at port 0x330-0x331 irq 9 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
atspeaker0: <AT speaker> at port 0x61 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0400> failed to probe at port 0x378-0x37f irq 7 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
1:020bfe3f 0..523=524 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ds0 attached
bpf: lo0 attached
ata0-master: success setting UDMA2 on VIA chip
ad0: <Maxtor 90648D3/GAS54112> ATA-4 disk at ata0 as master
ad0: 6179MB (12656448 sectors), 12556 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
stray irq 7
ata1-master: success setting UDMA2 on VIA chip
ad1: <QUANTUM FIREBALLlct08 04/A05.0X00> ATA-4 disk at ata1 as master
ad1: 4112MB (8421840 sectors), 8912 cyls, 15 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad1
Mounting root from ufs:/dev/ad0a
ad0s4: type 0xa5, start 1, end = 12656447, size 12656447 : OK
start_init: trying /sbin/init
ad1: invalid primary partition table: no magic
Linux-ELF exec handler installed
--==_Exmh_19822812510
Content-Type: text/plain ; name="agp.builtin"; charset=us-ascii
Content-Description: agp.builtin
Content-Disposition: attachment; filename="agp.builtin"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Sep 6 12:14:57 CDT 2000
toor@bloop.craftncomp.com:/usr/src/sys/compile/bloop
Calibrating clock(s) ... TSC clock: 501152654 Hz, i8254 clock: 1193221 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 501138398 Hz
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 128M bytes
Write Allocate 15-16M bytes: Disable
real memory = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0037c000 - 0x07fe5fff, 130457600 bytes (31850 pages)
avail memory = 127184896 (124204K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb020
bios32: Entry = 0xfb4a0 (c00fb4a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4d0
pnpbios: Found PnP BIOS data at 0xc00fc0a0
pnpbios: Entry = f0000:c0c8 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel.ko" at 0xc0363000.
nulldev: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
K6-family MTRR support enabled (2 registers)
VESA: information block
56 45 53 41 00 02 ca 6c 00 c0 01 00 00 00 74 69
00 c0 00 02 05 01 df 6c 00 c0 e6 6c 00 c0 f2 6c
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 11 mode(s) found
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc00c6974 (c0006974)
VESA: Matrox Graphics Inc.
VESA: Matrox Matrox G400 00
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 84061869 bytes/sec
bzero() bandwidth = 119061793 bytes/sec
pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> on motherboard
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0598, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1106, dev=0x0586, revid=0x47
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 4, range 32, base 00006400, size 4, enabled
found-> vendor=0x1106, dev=0x3040, revid=0x10
bus=0, slot=7, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x11ad, dev=0x0002, revid=0x20
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 4, range 32, base 00006c00, size 8, enabled
map[14]: type 1, range 32, base eb000000, size 8, enabled
pci0: <PCI bus> on pcib0
agp0: <VIA 82C598 (Apollo MVP3) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <VIA 82C598MVP/82C694X (Apollo MVP3/Pro133A) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: physical bus=1
found-> vendor=0x102b, dev=0x0525, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 3, range 32, base e8000000, size 25, enabled
map[14]: type 1, range 32, base e4000000, size 14, enabled
map[18]: type 1, range 32, base e5000000, size 23, enabled
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0x6400-0x640f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x6400
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x6408
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=50 status1=00
ata1: devices = 0x1
ata1: at 0x170 irq 15 on atapci0
dc0: <82c169 PNIC 10/100BaseTX> port 0x6c00-0x6cff mem 0xeb000000-0xeb0000ff irq 10 at device 9.0 on pci0
dc0: Ethernet address: 00:a0:cc:56:31:9a
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x001018, model 0x0021, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
Trying Read_Port at 203
CSC0000: start dependant
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x9
CSC0000: adding irq mask 0x20
CSC0000: adding io range 0x534-0x537, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20
CSC0000: start dependant
CSC0000: adding dma mask 0xa
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0x9aa0
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x26f, size=0x10, align=0x20
CSC0000: start dependant
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0x9aa0
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x3fb, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x30f, size=0x10, align=0x20
CSC0000: end dependant
CSC0001: start dependant
CSC0001: adding io range 0x200-0x207, size=0x8, align=0x8
CSC0001: start dependant
CSC0001: adding io range 0x208-0x20f, size=0x8, align=0x8
CSC0001: end dependant
CSC0010: adding io range 0x120-0xfff, size=0x8, align=0x8
CSC0003: start dependant
CSC0003: adding irq mask 0x200
CSC0003: adding io range 0x330-0x331, size=0x2, align=0x8
CSC0003: start dependant
CSC0003: adding irq mask 0x9a00
CSC0003: adding io range 0x330-0x361, size=0x2, align=0x8
CSC0003: start dependant
CSC0003: adding io range 0x330-0x3e1, size=0x2, align=0x8
CSC0003: end dependant
pnpbios: 16 devices, largest 69 bytes
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: end config
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: end config
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
PNP0800: end config
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: end config
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: end config
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
PNP0c02: end config
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x5000-0x507f, size=0x80, align=0
PNP0a03: adding io range 0x5080-0x50ff, size=0x80, align=0
PNP0a03: end config
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0c02: adding io range 0x208-0x20f, size=0x8, align=0
PNP0c02: end config
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
PNP0700: end config
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: end config
pnpbios: handle 14 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 16 device ID PNP0501 (0105d041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 03 3c
psm: status 90 03 3c
psm: status 90 03 3c
psm: data 08 00 00
psm: status 00 00 28
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
opl0 failed to probe at port 0x388 on isa0
mpu0 failed to probe at port 0x330 irq 9 on isa0
css0 failed to probe at port 0x534 irq 5 drq 1 flags 0x8 on isa0
joy0 failed to probe at port 0x201 on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
pcm0: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0
pcm: setmap 59c000, ff00; 0xcb556000 -> 59c000
pcm: setmap 5ac000, ff00; 0xcb566000 -> 5ac000
unknown: <GAME> failed to probe at port 0x200-0x207 on isa0
unknown: <CTRL> failed to probe at port 0x120-0x127 on isa0
unknown: <MPU> failed to probe at port 0x330-0x331 irq 9 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
atspeaker0: <AT speaker> at port 0x61 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0400> failed to probe at port 0x378-0x37f irq 7 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
1:020bfe3f 0..523=524 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ds0 attached
bpf: lo0 attached
ata0-master: success setting UDMA2 on VIA chip
ad0: <Maxtor 90648D3/GAS54112> ATA-4 disk at ata0 as master
ad0: 6179MB (12656448 sectors), 12556 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
ata1-master: success setting UDMA2 on VIA chip
ad1: <QUANTUM FIREBALLlct08 04/A05.0X00> ATA-4 disk at ata1 as master
ad1: 4112MB (8421840 sectors), 8912 cyls, 15 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad1
Mounting root from ufs:/dev/ad0a
ad0s4: type 0xa5, start 1, end = 12656447, size 12656447 : OK
start_init: trying /sbin/init
ad1: invalid primary partition table: no magic
Linux-ELF exec handler installed
--==_Exmh_19822812510
Content-Type: text/plain; charset=us-ascii
The views expressed above are not those of PGS Tensor.
"We've heard that a million monkeys at a million keyboards could produce
the Complete Works of Shakespeare; now, thanks to the Internet, we know
this is not true." Robert Wilensky, University of California
--==_Exmh_19822812510--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200009062254.e86MsIG00366>