Date: Tue, 2 Jun 2009 21:56:01 +0100 From: "Graeme Dargie" <arab@tangerine-army.co.uk> To: <freebsd-questions@freebsd.org> Subject: Intel NIC issues Message-ID: <01FB8F39BAD0BD49A6D0DA8F7897392956DF@Mercury.galaxy.lan.lcl>
next in thread | raw e-mail | index | archive | help
Hi all =20 Ok lets not go to war over this I just need some advice. =20 I have a 1u rack system that has one of these motherboards http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DPR-iG2+.cfm =20 Now according to where I got the server and that page it is supposed to have dual gigabit nics on board. =20 Dmesg shows the following =20 em0: <Intel PRO/1000 Network Connection 6.9.6> port 0x3000-0x301f mem 0xfc220000-0xfc23ffff,0xfc200000-0xfc21ffff irq 31 at device 4.0 on pci3 em0: [FILTER] em0: Ethernet address: 00:30:48:24:84:f2 =20 fxp0: <Intel 82550 Pro/100 Ethernet> port 0x4400-0x443f mem 0xfc321000-0xfc321fff,0xfc300000-0xfc31ffff irq 17 at device 2.0 on pci4 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:30:48:24:84:f3 fxp0: [ITHREAD] =20 =20 Now for reasons I can not fathom, one nic is showing just fine and the other is using a different driver and only speeds of upto 100mbs. =20 I have tried both 7.1 and 7.2 So is the information on the board wrong or is there something I am missing. =20 Regards =20 Graeme
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01FB8F39BAD0BD49A6D0DA8F7897392956DF>