Date: Thu, 28 Jan 1999 16:21:03 +0200 From: Shaun Courtney <shaun@emma.eng.uct.ac.za> To: hackers@FreeBSD.ORG Subject: DPT wobbles Message-ID: <19990128162102.A10431@emma.eng.uct.ac.za>
next in thread | raw e-mail | index | archive | help
Hi
We are using 2.2.8-Release with an Asus p2B motherboard and a dpt 2144uw
raid controller. Connected on the scsi chain are 3 ibm 4Gig, 50 pin
drives that form the raid array and an hp dat drive. After days of
operation the dpt controller starts beeping indicating a drive failure,
if we rebuild the array without replacing the "failed" drive it
continues to work for another couple of days and then starts beeping
again - often it is an entirely different drive that has failed. We have
replaced all three drives and have put the machine onto a UPS, but still
the problem occurs. Can anyone help?
Thanks
Shaun
--
Faculty of Engineering and the Built Environment
http://www.eng.uct.ac.za
Acting EBE IT Manager
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990128162102.A10431>