Date: Tue, 14 Mar 2000 22:09:53 +0200 (SAT) From: John Hay <jhay@mikom.csir.co.za> To: lance@woodson.com (Lance Woodson) Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: No PC-CARD Slots; Device Not Configured Message-ID: <200003142009.WAA51181@zibbi.mikom.csir.co.za> In-Reply-To: <38CD8708.1526342@woodson.com> from Lance Woodson at "Mar 13, 2000 06:25:44 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> I've installed today's 4.0-20000313-CURRENT snapshot but can't get my
> PCMCIA controller working.
>
> My kernel has:
> device card
> device pcic0 at isa? irq 11 port 0x3e0 iomem 0xd0000
> device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000
>
> dmesg shows:
> pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
> pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
>
> but pccardd gives: fatal error: no PC-CARD slots
> and pccardc gives: /dev/card0: Device not configured
>
I have seen this also when trying to install a 802.11 WaveLAN pcmcia
card in a normal PC with a PCI-PCMCIA bridge. In my case the bridge
is a TI PCI-1225. From looking at sys/pci/pcic_p.c I'm starting to
think the probe messages is just printed, but there is nothing
hooking the card into the rest of the pccard/pcmcia stuff... but
I might be wrong. :-)
Here is the dmesg of a boot -v session in case someone have a clue
about how these things should work.
John
--
John Hay -- John.Hay@mikom.csir.co.za
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000311-SNAP #0: Mon Mar 13 18:33:30 SAST 2000
root@tj1.cids.org.za:/usr/src/sys/compile/TJ
Calibrating clock(s) ... TSC clock: 501201757 Hz, i8254 clock: 1193339 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x002b3000 - 0x07fe7fff, 131289088 bytes (32053 pages)
fb: new array size 4
avail memory = 127397888 (124412K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00facd0
bios32: Entry = 0xfb150 (c00fb150) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb330
pnpbios: Found PnP BIOS data at 0xc00fbed0
pnpbios: Entry = f0000:bef8 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f6ab0
Preloaded elf kernel "kernel" at 0xc029a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 0000e000, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x5333, dev=0x8901, revid=0x06
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 1, range 32, base e4000000, size 26
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base ea110000, size 12
map[14]: type 1, range 32, base 0000e400, size 6
map[18]: type 1, range 32, base ea000000, size 20
found-> vendor=0x104c, dev=0xac1c, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=e8
intpin=a, irq=9
map[10]: type 1, range 32, base ea108000, size 12
found-> vendor=0x104c, dev=0xac1c, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=ec
intpin=a, irq=9
map[10]: type 1, range 32, base ea10c000, size 12
found-> vendor=0x1073, dev=0x000c, revid=0x03
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base ea100000, size 15
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 status0=28 status1=28
ata1: mask=03 status0=18 status1=18
ata1: devices = 0x0
ata1: probe allocation failed
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pci0: <S3 Trio 64V2/DX/GX graphics accelerator> (vendor=0x5333, dev=0x8901) at 8.0 irq 12
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xe400-0xe43f mem 0xea000000-0xea0fffff,0xea110000-0xea110fff irq 5 at device 9.0 on pci0
fxp0: Ethernet address 00:90:27:8b:3b:7d
fxp0: supplying EUI64: 00:90:27:ff:fe:8b:3b:7d
bpf: fxp0 attached
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> mem 0xea108000-0xea108fff irq 9 at device 10.0 on pci0
PCI Config space:
00: ac1c104c 02100007 06070001 00824008
10: ea108000 020000a0 0000e801 ea109000
20: ea10a000 ea10b000 00000000 00000000
30: 00000000 00000000 00000000 03400109
40: 2023133f 00000001 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 28449060 00000000 00000000 0cc07d92
90: 606000c0 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000006: 00000000: 30000410: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> mem 0xea10c000-0xea10cfff irq 9 at device 10.1 on pci0
PCI Config space:
00: ac1c104c 02100007 06070001 00824008
10: ea10c000 020000a0 0000ec01 ea10d000
20: ea10e000 ea10f000 00000000 00000000
30: 00000000 00000000 00000000 03400109
40: 2023133f 00000001 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 28449060 00000000 00000000 0cc07d92
90: 606000c0 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000006: 00000000: 30001810: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pci0: <unknown card> (vendor=0x1073, dev=0x000c) at 11.0 irq 11
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
isa_probe_children: probing PnP devices
BIOS Geometries:
0:0315fe3f 0..789=790 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 40084040, tty 4003009a, net 400700ba
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
ata0-master: success setting up UDMA2 mode on PIIX4 chip
ad0: <ST36531A/3.41> ATA-4 disk at ata0 as master
ad0: 6204MB (12706470 sectors), 13446 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
Creating DISK wd0
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 12691349, size 12691287 : OK
start_init: trying /sbin/init
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200003142009.WAA51181>