Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 19 May 2005 23:19:16 +0200
From:      Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no>
To:        freebsd-multimedia@freebsd.org
Subject:   new gadget - Doro 212IPC usb telephone
Message-ID:  <20050519231916.78772610.torfinn.ingolfsen@broadpark.no>

next in thread | raw e-mail | index | archive | help
Ok, I just couldn't resist this.

I saw this gadget in my local "computers, tools and anything" store, and
just had to buy it.

It is a telephone (handset) with an usb connector. On the box, it is
labeled as "USB broadband telephone", and on the back it says "supports
most Softphone programs, protocol independent, H.323 or SIP, conforms to
USB 12 Mbps 1.1 standard, conforms to USB audio device release 1.0,
real-time volumen adjustment button". I repeat this here because the
Doro web page (http://www.doro.com/) was less than informational in
describing their products. The manual says that only Win 98SE/ME/2000/XP
or Mac OS9 / OSX is supported, but I already guessed that (except for
the Mac part).

When I connect it to my FreeBSD box, /var/log/messages shows:
May 19 22:59:53 kg-work kernel: uhid0: ??Welltech Computer Doro 212IPC,
rev 1.00/47.26, addr 3, iclass 1/1

usbdevs -v says:
 port 2 addr 3: full speed, power 500 mA, config 1, Doro 212IPC(0x1020),
??Welltech Computer(0x0451), rev 47.26

Now, if I only could get this to work with Skype. :)
-- 
Regards,
Torfinn Ingolfsen,
Norway



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050519231916.78772610.torfinn.ingolfsen>