Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 16 Oct 1998 09:03:51 -0700 (PDT)
From:      Jaye Mathisen <mrcpu@internetcds.com>
To:        Chris Johnson <cjohnson@palomine.net>
Cc:        stable@FreeBSD.ORG
Subject:   Re: Annoying >2.2.5 oddity on reboot.
Message-ID:  <Pine.NEB.3.95.981016090250.2118M-100000@schizo.cdsnet.net>
In-Reply-To: <19981016120344.A23647@palomine.net>

next in thread | previous in thread | raw e-mail | index | archive | help

Not even in the ballpark.  We're not even getting to the bootloader on a
warm boot.

These are also freshinstalls (I've tried both ways), and the fstabs are
correct.

They cold boot perfectly.  Just won't warm reboot, w/o hitting the reset
button.

On Fri, 16 Oct 1998, Chris Johnson wrote:

> On Fri, Oct 16, 1998 at 08:27:08AM -0700, Jaye Mathisen wrote:
> > 
> > 
> > I have a bunch of DEC ZX and HX 6000 P6 boxes.  Have been running 2.2.5
> > for heap 'um big long time, zero troubles.
> > 
> > So I upgraded 2 of them to -stable as of yesterday.
> > 
> > Now neither of them will reboot properly.  They shutdown, and get to the
> > stage where they should start reloading, and they just hang.
> 
> The following, from the 2.2.6 errata, might help:
> 
> ---- System Update Information:
> o Root mountpoint change which affects those upgrading via
>  "make world" or a FreeBSD 2.2.6 upgrade.
> 
> Fix:  2.2.6 introduces a change in the naming of the device from
>       which the root filesystem is mounted.  This change affects all systems,
>       however user intervention is only required for systems undergoing an
>       upgrade installation.
> 
> Previously, the root filesystem was always mounted from the
> compatibility slice, while other partitions on the same disk were
> mounted from their true slice.  This might, for example, have resulted
> in an /etc/fstab file like:
> 
> # Device      Mountpoint      FStype  Options         Dump    Pass#
> /dev/wd0s2b   none            swap    sw              0       0
> /dev/wd0a     /               ufs     rw              1       1
> /dev/wd0s2f   /local0         ufs     rw              1       1
> /dev/wd0s2e   /usr            ufs     rw              1       1
> 
> For FreeBSD 2.2.6 and later, this format changes so that the device for
> '/' is consistent with others, ie.
> 
> # Device      Mountpoint      FStype  Options         Dump    Pass#
> /dev/wd0s2b   none            swap    sw              0       0
> /dev/wd0s2a   /               ufs     rw              1       1
> /dev/wd0s2f   /local0         ufs     rw              1       1 
> /dev/wd0s2e   /usr            ufs     rw              1       1
> 
> If /etc/fstab is not updated manually in this case, the system will
> issue a warning message whenever / is mounted (normally at startup)
> indicating the change that must be made.  In addition, trouble may be
> experienced if the root filesystem is not correctly unmounted, whereby
> the root filesystem will not be marked clean at the next reboot.
> 
> This change should be made as soon as the upgraded system has been 
> successfully rebooted.
> ------------------------------
> Chris Johnson
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.3.95.981016090250.2118M-100000>