Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 28 Jul 2005 23:55:58 +0200
From:      Bekir Alpaydin <bekir@bekir.nl>
To:        freebsd-mobile@freebsd.org
Subject:   Re: Re: (No Subject)
Message-ID:  <cd24a9e8.2324ca76.81b8100@imap01.bwc.eu.blackberry.com>

next in thread | raw e-mail | index | archive | help
Hello

I'm using the acer ferrari 3000 with includes a broadcom 
wireless NIC.
I've followed the instructions on 
http://lists.freebsd.org/pipermail/freebsd-questions/2004-
August/056835.html
. 

I'm using Freebsd 5.4 with all the ports updated woth 
CURRENT and all the sources
installed.
I'm using the bcmwl5.SYS and bcmwl5.inf windows drivers 
for NDIS. the INF file is
a unicode file, I've convert this
to ASII file.

When I am at the following step:

  Finally you need to build the if_ndis module. This 
requires that you 
  have got the drivers for your NIC availeable.

   # cd /sys/modules/if_ndis << this give no errors
   # ndiscvt -i bcmwl5.inf -s bcmwl5.sys \
   -o ndis_driver_data.h << this give no errors
   [long output snipped]
   # make <<This gives an error:

/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:49
3: error: `drv_data' undeclared
(first use in this function)
*** Error code 1

Stop in /usr/src/sys/modules/if_ndis.

I got the error above when I want to try to make. I've 
googled hours and hours for
a week, but I got the error.


output of pciconf -lvv command,

Here it is:

************************************
************************************
************************************

agp0@pci0:0:0:  class=0x060000 card=0x72051106 
chip=0x32051106 rev=0x00 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'KM400 CPU to PCI Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000080 
chip=0xb1681106 rev=0x00 hdr=0x01
    vendor   = 'VIA Technologies Inc'
    device   = 'ProSavageDDR P4X333 CPU to AGP 2.0/3.0 
Bridge'
    class    = bridge
    subclass = PCI-PCI
cbb0@pci0:7:0:  class=0x060700 card=0x003e1025 
chip=0xac50104c rev=0x02 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1410 PC card cardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
fwohci0@pci0:8:0:       class=0x0c0010 card=0x003e1025 
chip=0x8026104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer 
Controller'
    class    = serial bus
    subclass = FireWire
none0@pci0:9:0: class=0x028000 card=0x1220185f 
chip=0x432014e4 rev=0x03 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM4306 802.11b/g Wireless LAN Controller'
    class    = network
uhci0@pci0:16:0:        class=0x0c0300 card=0x003e1025 
chip=0x30381106 rev=0x80 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA 
Chipsets)'
    class    = serial bus
    subclass = USB
uhci1@pci0:16:1:        class=0x0c0300 card=0x003e1025 
chip=0x30381106 rev=0x80 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA 
Chipsets)'
    class    = serial bus
    subclass = USB
uhci2@pci0:16:2:        class=0x0c0300 card=0x003e1025 
chip=0x30381106 rev=0x80 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA 
Chipsets)'
    class    = serial bus
    subclass = USB
none1@pci0:16:3:        class=0x0c0320 card=0x003e1025 
chip=0x31041106 rev=0x82 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT6202 USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
isab0@pci0:17:0:        class=0x060100 card=0x003e1025 
chip=0x31771106 rev=0x00 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT8235 PCI to ISA Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:17:1:      class=0x01018a card=0x003e1025 
chip=0x05711106 rev=0x06 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82xxxx EIDE Controller (All VIA 
Chipsets)'
    class    = mass storage
    subclass = ATA
pcm0@pci0:17:5: class=0x040100 card=0x003e1025 
chip=0x30591106 rev=0x50 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT8233/33A/8235/8237 AC97 Enhanced Audio 
Controller'
    class    = multimedia
    subclass = audio
none2@pci0:17:6:        class=0x078000 card=0x003e1025 
chip=0x30681106 rev=0x80 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82C686/686A/686B AC97 Modem controller'
    class    = simple comms
vr0@pci0:18:0:  class=0x020000 card=0x003e1025 
chip=0x30651106 rev=0x74 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT6102 Rhine II PCI Fast Ethernet 
Controller'
    class    = network
    subclass = ethernet
none3@pci1:0:0: class=0x030000 card=0x003e1025 
chip=0x5c611002 rev=0x01 hdr=0x00
    vendor   = 'ATI Technologies Inc.'
    device   = '??? Mobility Radeon 9200'
    class    = display
    subclass = VGA




Could you help me please?

Greets,

Bekir

Marcin Jessa wrote ..
> On Tue, 26 Jul 2005 13:17:02 +0000 GMT
> "Bekir Alpaydin" <bekir@bekir.nl> wrote:
> 
> > Hello Dear,
> > 
> > I want to install my wifi card of my acer ferrari 3000 
with freebsd 5.4
> . Everything is working great. Only the wifi card.
> What wlan nic is that?
> # pciconf -lvv
>  
> > I've followed the instructions from ndis, but I got an 
error 'stop in
> /usr/src/sys/modules/if_ndis' when installing.
> That doesn't say anything. Where did it stop? What did 
you exactly do?
>  
> > Could you help me please?
> 
> You need to send more info first.
-----------------------------
Send with my BlackBerry wireless Handheld



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cd24a9e8.2324ca76.81b8100>