Date: Tue, 01 Nov 2005 18:48:52 +1300 From: Mark Kirkwood <markir@paradise.net.nz> To: Mark Kirkwood <markir@paradise.net.nz> Cc: freebsd-hardware@freebsd.org Subject: Re: Cannot install 6.0-RC1 on Promise SX4060 (DANGER WILL ROBINSON) Message-ID: <436701C4.90604@paradise.net.nz> In-Reply-To: <4366AD8B.5060209@paradise.net.nz> References: <43659B35.4090905@paradise.net.nz> <4366AD8B.5060209@paradise.net.nz>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------070504020409080208060308
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Mark Kirkwood wrote:
> Mark Kirkwood wrote:
>
>> Hi, I am trying to install 6.0-RC1 on a system with a Promise SX4060
>> (PDC20621) + 4 Maxtor ATA-133 drives (6E040L0). The mobo is a Tyan
>> Thunder LE (S2510).
>>
>> The card appears to be detected ok (tho the exact text rushes past
>> before I can read it completely), but the drive probing fails completely:
>>
>> ad4 : FAILURE - SET FEATURES TRANSFER MODE timed out.
>> ad4 : FAILURE - SET FEATURES RCACHE timed out.
>> ad4 : FAILURE - SET FEATURES WCACHE timed out.
>> ad4 : FAILURE - SET FEATURES SET_MULTI.
>> ad4 : FAILURE - READ timed out (LBA = 80293185)
>> ad4 : FAILURE - READ retrying (0 retries left) LBA = 0
>> ..
>> ad4 : req = 0xc3b78960 SET FEATURES SET TRANSFER MODE semaphore
>> timeout !!DANGER WILL ROBINSON!!
>> ..
>> ..
>> (hand copied as I don't have a serial console)
>>
>>
>
> Some more info - running the PCI bus at 33Mhz (default is 66Mhz) makes
> no difference.
>
Ok, in order to provide dmesg and pciconv, I booted the machine with the
TX2000 and the SX4060 - however with disks plugged into the TX2000 only.
It boots ok in this case, and so I can provide at least this basic info:
--------------070504020409080208060308
Content-Type: text/plain;
name="dmesg.verbose"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.verbose"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RC1 #0: Tue Nov 1 18:10:17 NZDT 2005
postgres@istral.markir.net:/usr/obj/usr/src/sys/STANDARD
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a41000.
Calibrating clock(s) ... i8254 clock: 1193022 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 996845780 Hz
CPU: Intel Pentium III (996.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000007dbc7fff, 2096758784 bytes (511904 pages)
avail memory = 2096537600 (1999 MB)
MP Configuration Table version 1.4 found at 0xc00f0db0
APIC: Using the MPTable enumerator.
SMP: Added CPU 0 (BSP)
SMP: Added CPU 1 (AP)
MPTable: <AMI CNB30LE >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00fdb90
bios32: Entry = 0xfdba0 (c00fdba0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdbc1
pnpbios: Found PnP BIOS data at 0xc00f4c60
pnpbios: Entry = f0000:3964 Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic1: Assuming intbase of 16
ioapic1: intpin 0 -> PCI IRQ 16 (level, low)
ioapic1: intpin 1 -> PCI IRQ 17 (level, low)
ioapic1: intpin 2 -> PCI IRQ 18 (level, low)
ioapic1: intpin 3 -> PCI IRQ 19 (level, low)
ioapic1: intpin 4 -> PCI IRQ 20 (level, low)
ioapic1: intpin 5 -> PCI IRQ 21 (level, low)
ioapic1: intpin 6 -> PCI IRQ 22 (level, low)
ioapic1: intpin 7 -> PCI IRQ 23 (level, low)
ioapic1: intpin 8 -> PCI IRQ 24 (level, low)
ioapic1: intpin 9 -> PCI IRQ 25 (level, low)
ioapic1: intpin 10 -> PCI IRQ 26 (level, low)
ioapic1: intpin 11 -> PCI IRQ 27 (level, low)
ioapic1: intpin 12 -> PCI IRQ 28 (level, low)
ioapic1: intpin 13 -> PCI IRQ 29 (level, low)
ioapic1: intpin 14 -> PCI IRQ 30 (level, low)
ioapic1: intpin 15 -> PCI IRQ 31 (level, low)
ioapic1: intpin 6 bus PCI
ioapic1: intpin 6 trigger: level
ioapic1: intpin 6 polarity: low
ioapic1: intpin 11 bus PCI
ioapic1: intpin 11 trigger: level
ioapic1: intpin 11 polarity: low
ioapic1: intpin 4 bus PCI
ioapic1: intpin 4 trigger: level
ioapic1: intpin 4 polarity: low
ioapic1: intpin 5 bus PCI
ioapic1: intpin 5 trigger: level
ioapic1: intpin 5 polarity: low
ioapic0: intpin 10 bus PCI
ioapic0: intpin 10 trigger: level
ioapic0: intpin 10 polarity: low
ioapic1: intpin 7 bus PCI
ioapic1: intpin 7 trigger: level
ioapic1: intpin 7 polarity: low
ioapic0: intpin 1 bus ISA
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 bus ISA
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 bus ISA
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 bus ISA
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 6 bus ISA
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 8 bus ISA
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 12 bus ISA
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 13 bus ISA
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: high
ioapic0: intpin 14 bus ISA
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 bus ISA
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00f51d0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 15 A 0x01 10
embedded 0 4 A 0x14 3 4 5 7 9 10 11 12 14 15
embedded 0 5 A 0x15 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x16 3 4 5 7 9 10 11 12 14 15
embedded 0 3 A 0x1f 3 4 5 7 9 10 11 12 14 15
embedded 1 6 A 0x1d 3 4 5 7 9 10 11 12 14 15
embedded 1 6 B 0x1c 3 4 5 7 9 10 11 12 14 15
slot 1 1 2 A 0x1b 3 4 5 7 9 10 11 12 14 15
slot 1 1 2 B 0x1e 3 4 5 7 9 10 11 12 14 15
slot 1 1 2 C 0x1d 3 4 5 7 9 10 11 12 14 15
slot 1 1 2 D 0x1c 3 4 5 7 9 10 11 12 14 15
slot 2 1 3 A 0x17 3 4 5 7 9 10 11 12 14 15
slot 2 1 3 B 0x18 3 4 5 7 9 10 11 12 14 15
slot 2 1 3 C 0x19 3 4 5 7 9 10 11 12 14 15
slot 2 1 3 D 0x1a 3 4 5 7 9 10 11 12 14 15
slot 3 1 4 A 0x1e 3 4 5 7 9 10 11 12 14 15
slot 3 1 4 B 0x1d 3 4 5 7 9 10 11 12 14 15
slot 3 1 4 C 0x1c 3 4 5 7 9 10 11 12 14 15
slot 3 1 4 D 0x1b 3 4 5 7 9 10 11 12 14 15
slot 4 1 5 A 0x1d 3 4 5 7 9 10 11 12 14 15
slot 4 1 5 B 0x1c 3 4 5 7 9 10 11 12 14 15
slot 4 1 5 C 0x1b 3 4 5 7 9 10 11 12 14 15
slot 4 1 5 D 0x1e 3 4 5 7 9 10 11 12 14 15
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x06
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x06
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=0, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fc000000, size 24, enabled
map[14]: type 4, range 32, base 0000d800, size 8, enabled
map[18]: type 1, range 32, base fdaff000, size 12, enabled
pcib0: slot 1 INTA routed to irq 22
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fdafe000, size 12, enabled
map[14]: type 4, range 32, base 0000d400, size 6, enabled
map[18]: type 1, range 32, base fd900000, size 20, enabled
pcib0: slot 4 INTA routed to irq 20
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fdafd000, size 12, enabled
map[14]: type 4, range 32, base 0000d000, size 6, enabled
map[18]: type 1, range 32, base fd700000, size 20, enabled
pcib0: slot 5 INTA routed to irq 21
found-> vendor=0x1166, dev=0x0200, revid=0x50
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 00000580, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x1166, dev=0x0220, revid=0x04
bus=0, slot=15, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=10
map[10]: type 1, range 32, base fdafc000, size 12, enabled
pcib0: slot 15 INTA routed to irq 10
pci0: <display, VGA> at device 1.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xfdafe000-0xfdafefff,0xfd900000-0xfd9fffff irq 20 at device 4.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafe000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 100c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:e0:81:20:00:0c
fxp0: [MPSAFE]
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfdafd000-0xfdafdfff,0xfd700000-0xfd7fffff irq 21 at device 5.0 on pci0
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafd000
fxp1: using memory space register mapping
fxp1: PCI IDs: 8086 1229 8086 100c 0008
fxp1: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
fxp1: Ethernet address: 00:e0:81:20:00:0d
fxp1: [MPSAFE]
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0xfdafc000-0xfdafcfff irq 10 at device 15.2 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafc000
ohci0: (New OHCI DeviceId=0x02201166)
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x105a, dev=0x6269, revid=0x02
bus=1, slot=2, func=0
class=01-04-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 4, range 32, base 0000efe0, size 3, enabled
map[14]: type 4, range 32, base 0000efac, size 2, enabled
map[18]: type 4, range 32, base 0000efa0, size 3, enabled
map[1c]: type 4, range 32, base 0000efa8, size 2, enabled
map[20]: type 4, range 32, base 0000ef90, size 4, enabled
map[24]: type 1, range 32, base febf0000, size 16, enabled
pcib1: slot 2 INTA routed to irq 27
found-> vendor=0x105a, dev=0x6621, revid=0x01
bus=1, slot=3, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=7
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 4, range 32, base 0000e400, size 8, enabled
map[18]: type 4, range 32, base 0000e000, size 8, enabled
map[1c]: type 1, range 32, base fea00000, size 20, enabled
map[20]: type 1, range 32, base febd8000, size 15, enabled
pcib1: slot 3 INTA routed to irq 23
atapci1: <Promise PDC20271 UDMA133 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f mem 0xfebf0000-0xfebfffff irq 27 at device 2.0 on pci1
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xef90
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xefe0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xefac
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xefa0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xefa8
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
atapci2: <Promise PDC20621 UDMA100 controller> port 0xe800-0xe8ff,0xe400-0xe4ff,0xe000-0xe0ff mem 0xfea00000-0xfeafffff,0xfebd8000-0xfebdffff irq 23 at device 3.0 on pci1
atapci2: rid 0x20 is memory, requested 4
atapci2: Reserved 0x8000 bytes for rid 0x20 type 3 at 0xfebd8000
atapci2: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xfea00000
atapci2: [MPSAFE]
atapci2: DIMM size 1024MB @ 0x00000000
ata4: <ATA channel 0> on atapci2
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
ata5: <ATA channel 1> on atapci2
ata5: reset tp1 mask=03 ostat0=60 ostat1=70
ata5: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata5: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata5: reset tp2 stat0=20 stat1=30 devices=0x0
ata5: [MPSAFE]
ata6: <ATA channel 2> on atapci2
ata6: reset tp1 mask=03 ostat0=60 ostat1=70
ata6: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata6: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata6: reset tp2 stat0=20 stat1=30 devices=0x0
ata6: [MPSAFE]
ata7: <ATA channel 3> on atapci2
ata7: reset tp1 mask=03 ostat0=60 ostat1=70
ata7: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata7: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata7: reset tp2 stat0=20 stat1=30 devices=0x0
ata7: [MPSAFE]
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 14 devices, largest 234 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x7fffffff, size=0x7ff00000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfec01000-0xfec01fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0x1
PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0x1
PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0x1
PNP0c02: adding io range 0xc14-0xc14, size=0x1, align=0x1
PNP0c02: adding io range 0xc49-0xc4a, size=0x2, align=0x1
PNP0c02: adding io range 0xc52-0xc52, size=0x1, align=0x1
PNP0c02: adding io range 0xc6c-0xc6c, size=0x1, align=0x1
PNP0c02: adding io range 0xc6f-0xc6f, size=0x1, align=0x1
PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0x1
PNP0c02: adding io range 0xf50-0xf58, size=0x9, align=0x1
PNP0c02: adding io range 0x374-0x375, size=0x2, align=0x1
PNP0c02: adding io range 0x377-0x377, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xd3800-0xdffff, size=0xc800
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x580-0x58f, size=0x10, align=0x1
PNP0c02: adding io range 0x500-0x51f, size=0x20, align=0x1
pnpbios: handle 9 device ID PNP0c02 (020cd041)
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 11 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 13 device ID PNP0700 (0007d041)
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff,0xd1800-0xd27ff,0xd2800-0xd37ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x8041 0x8051 0x8041 0x8041
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x8041 0x8049 0x8041 0x8041
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9fbff,0x9fc00-0x9ffff,0xe0000-0xfffff,0x100000-0x7fffffff,0xfec00000-0xfec00fff,0xfec01000-0xfec01fff,0xfee00000-0xfee00fff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x580-0x58f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
Device configuration finished.
Reducing kern.maxvnodes 134371 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66456452 hz
Timecounter "TSC" frequency 996845780 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on ServerWorks ROSB4 chip
acd0: <CREATIVE CD-RW RW8439E/1R09> CDRW drive at ata1 as master
acd0: read 5511KB/s (5511KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad4: setting PIO4 on Promise PDC20271 chip
ad4: setting UDMA133 on Promise PDC20271 chip
ad4: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-master UDMA133
ad4: 80293248 sectors [79656C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
********* ATA Promise FastTrak Metadata *********
promise_id <Promise Technology, Inc.>
dummy_0 0x00020000
magic_0 0x0100000001d90812
magic_1 0x1031
magic_2 0x00000c57
integrity 0x00000080 80<VALID>
flags 0x07 7<ASSIGNED,ONLINE,VALID>
disk_number 0
channel 0x00
device 0x00
magic_0 0x0100000001d90812
disk_offset 4294967295
disk_sectors 80293185
rebuild_lba 0xffffffff
generation 0x0002
status 0x0f f<READY,INITED,ONLINE,VALID>
type RAID0
total_disks 2
stripe_shift 7
array_width 2
array_number 0
total_sectors 160586240
cylinders 9995
heads 254
sectors 63
magic_1 0x0000000009531101
DISK# flags dummy_0 channel device magic_0
0 7<ASSIGNED,ONLINE,VALID> 0x00 0x00 0x00 0x0100000001d90812
1 7<ASSIGNED,ONLINE,VALID> 0x00 0x01 0x00 0x0000000001d90812
2 0 0x00 0x00 0x00 0x0000000000000000
3 0 0x00 0x00 0x00 0x0000000000000000
4 0 0x00 0x00 0x00 0x0000000000000000
5 0 0x00 0x00 0x00 0x0000000000000000
6 0 0x00 0x00 0x00 0x0000000000000000
7 0 0x00 0x00 0x00 0x0000000000000000
checksum 0x7429f4e7
=================================================
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad6: setting PIO4 on Promise PDC20271 chip
ad6: setting UDMA133 on Promise PDC20271 chip
ad6: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata3-master UDMA133
ad6: 80293248 sectors [79656C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
********* ATA Promise FastTrak Metadata *********
promise_id <Promise Technology, Inc.>
dummy_0 0x00020000
magic_0 0x0000000001d90812
magic_1 0x1031
magic_2 0x00000c57
integrity 0x00000080 80<VALID>
flags 0x07 7<ASSIGNED,ONLINE,VALID>
disk_number 1
channel 0x01
device 0x00
magic_0 0x0000000001d90812
disk_offset 4294967295
disk_sectors 80293185
rebuild_lba 0xffffffff
generation 0x0002
status 0x0f f<READY,INITED,ONLINE,VALID>
type RAID0
total_disks 2
stripe_shift 7
array_width 2
array_number 0
total_sectors 160586240
cylinders 9995
heads 254
sectors 63
magic_1 0x0000000009531101
DISK# flags dummy_0 channel device magic_0
0 7<ASSIGNED,ONLINE,VALID> 0x00 0x00 0x00 0x0100000001d90812
1 7<ASSIGNED,ONLINE,VALID> 0x00 0x01 0x00 0x0000000001d90812
2 0 0x00 0x00 0x00 0x0000000000000000
3 0 0x00 0x00 0x00 0x0000000000000000
4 0 0x00 0x00 0x00 0x0000000000000000
5 0 0x00 0x00 0x00 0x0000000000000000
6 0 0x00 0x00 0x00 0x0000000000000000
7 0 0x00 0x00 0x00 0x0000000000000000
checksum 0x722af5e7
=================================================
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format Promise Fasttrak
type RAID0
flags 0x01 1<READY>
magic_0 0x0000000000000000
magic_1 0x0000000009531101
generation 2
total_sectors 160586240
offset_sectors 0
heads 255
sectors 63
cylinders 9996
width 2
interleave 128
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 80293185
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 80293185
=================================================
ar0: 78411MB <Promise Fasttrak RAID0 (stripe 64 KB)> status: READY
ar0: 160586240 sectors [9996C/255H/63S] <> subdisks defined as:
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 10 (PCI IRQ 10) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic1: routing intpin 4 (PCI IRQ 20) to cluster 0
ioapic1: routing intpin 5 (PCI IRQ 21) to cluster 0
ioapic1: routing intpin 7 (PCI IRQ 23) to cluster 0
ioapic1: routing intpin 11 (PCI IRQ 27) to cluster 0
GEOM: new disk ar0
Trying to mount root from ufs:/dev/ar0s1a
start_init: trying /sbin/init
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
--------------070504020409080208060308
Content-Type: text/plain;
name="pciconf.verbose"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="pciconf.verbose"
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'NB6536 (CNB20-LE) AGP interface'
class = bridge
subclass = HOST-PCI
hostb1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'NB6536 (CNB20-LE) AGP interface'
class = bridge
subclass = HOST-PCI
none0@pci0:1:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Rage XL PCI'
class = display
subclass = VGA
fxp0@pci0:4:0: class=0x020000 card=0x100c8086 chip=0x12298086 rev=0x08 hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
fxp1@pci0:5:0: class=0x020000 card=0x100c8086 chip=0x12298086 rev=0x08 hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
isab0@pci0:15:0: class=0x060100 card=0x02001166 chip=0x02001166 rev=0x50 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OSB4 PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:15:1: class=0x01018a card=0x00000000 chip=0x02111166 rev=0x00 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OSB4 PCI EIDE Controller'
class = mass storage
subclass = ATA
ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x04 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OSB4 OpenHCI Compliant USB Controller'
class = serial bus
subclass = USB
atapci1@pci1:2:0: class=0x010485 card=0x4d68105a chip=0x6269105a rev=0x02 hdr=0x00
vendor = 'Promise Technology Inc'
device = 'PDC20271 FastTrak TX2000 EIDE controller'
class = mass storage
subclass = RAID
atapci2@pci1:3:0: class=0x010400 card=0x6621105a chip=0x6621105a rev=0x01 hdr=0x00
vendor = 'Promise Technology Inc'
device = 'PDC 20621(?) FastTrak SX4000'
class = mass storage
subclass = RAID
--------------070504020409080208060308--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?436701C4.90604>